[PATCH 0/5] arm64: dts: add description for solidrun am642 som and hummingboard evb

[Josua Mayer]

This series adds DT bindings and dts descriptions for SolidRun AM642
based SoM and Hummingboard EVB.

Additionally a commit from downstream vendor kernel are included,
enhancing support for pru based ethernet.
I wasn't sure how to properly annotate it in commit description /
signed-off area ...:

1. add description for "Industrial Ethernet Peripherals" (IEP) to am64
   https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6
   IEP is already supported in-tree by a driver, and used in
   k3-am65-main.dtsi.

Unfortunately dtbs_check reported many problems, I put them up as rfc in
the commit description of patch #2.

Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
Josua Mayer (4):
      dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
      arm64: dts: add description for solidrun am642 som and evaluation board
      arm64: dts: ti: hummingboard-t: add descriptions for m.2 pci-e and usb-3
      arm64: dts: ti: am642-sr-som: enable iep for pru ethernet ports

Suman Anna (1):
      arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes

 Documentation/devicetree/bindings/arm/ti/k3.yaml   |   7 +
 arch/arm64/boot/dts/ti/Makefile                    |   3 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi           |  24 +
 .../boot/dts/ti/k3-am642-hummingboard-t-pcie.dts   |  31 +
 .../boot/dts/ti/k3-am642-hummingboard-t-usb3.dts   |  37 ++
 arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts | 333 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi        | 639 +++++++++++++++++++++
 7 files changed, 1074 insertions(+)
---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20240101-add-am64-som-51a1ca47edf3

Sincerely,
-- 
Josua Mayer <josua@xxxxxxxxxxxxx>