Re: [PATCH] pwm: imx27: workaround of the pwm output bug

[Francesco Dolcini]

On Fri, Dec 29, 2023 at 12:00:07PM +0530, pratikmanvar09@xxxxxxxxx wrote:
> From: Clark Wang <xiaoning.wang@xxxxxxx>
> 
> This fixes the pwm output bug when decrease the duty cycle.
> This is a limited workaround for the PWM IP issue TKT0577206.
> 
> Root cause:
> When the SAR FIFO is empty, the new write value will be directly applied
> to SAR even the current period is not over.
> If the new SAR value is less than the old one, and the counter is
> greater than the new SAR value, the current period will not filp the
> level. This will result in a pulse with a duty cycle of 100%.
> 
> Workaround:
> Add an old value SAR write before updating the new duty cycle to SAR.
> This will keep the new value is always in a not empty fifo, and can be
> wait to update after a period finished.
> 
> Limitation:
> This workaround can only solve this issue when the PWM period is longer
> than 2us(or <500KHz).
> 
> Reviewed-by: Jun Li <jun.li@xxxxxxx>
> Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
> Link: https://github.com/nxp-imx/linux-imx/commit/16181cc4eee61d87cbaba0e5a479990507816317
> Tested-by: Pratik Manvar <pratik.manvar@xxxxxxx>

You need to add your signed-off-by at the end when sending a patch, no
matter if you are the author or not.

Francesco