Re: [PATCH v5 0/2] Add gpio driver support for Realtek DHC SoCs

[Bartosz Golaszewski]

On Thu, Dec 28, 2023 at 11:48 AM Tzuyi Chang <tychang@xxxxxxxxxxx> wrote:
>
> These patches add the bindings and the gpio driver for Realtek
> DHC(Digital Home Center) RTD SoCs, including RTD1295, RTD1395,
> RTD1619, RTD1319, RTD1619B, RTD1319D and RTD1315E.
>
> Change log:
> v4->v5:
> 1. Add more description in the Kconfig.
> 2. Add comment for the counter-intuitive number 31.
> 3. Convert to use cleanup API and module_platform_driver() macro.
> 4. Simplify some of the code as suggested in patch v4.
> v3->v4:
> 1. Arrange the compatible list in alphanumerical order.
> 2. Remove the size check for the offset array.
> 3. Add the debounce callback.
> 4. Conducted a review of the critical section, employing raw_spinlock_t for locking purposes.
> 5. Add gpiochip_enable_irq/gpiochip_disable_irq to fulfill the immutability requirements.
> 6. Use irqd_to_hwirq to get hwirq.
> v2->v3:
> 1. Remove generic compatible and use SoC-specific compatible instead.
> 2. Add the missing descriptions for the rtd_gpio_info structure members.
> 3. Assign gpio_chip fwnode.
> v1->v2:
> 1. Add description for DHC RTD SoCs in the bindings.
> 2. Revise the compatible names in the bindings.
> 3. Transitioned from OF API to platform_device API.
> 4. Use u8 for the offset array within the rtd_gpio_info structure.
> 5. Record the size of each array within the rtd_gpio_info structure and
>    implement checks to prevent out-of-bounds access.
> 6. Use GPIOLIB_IRQCHIP helpers to register interrupts.
> 7. Use dynamic allocation for GPIO base.
>
> Tzuyi Chang (2):
>   dt-bindings: gpio: realtek: Add realtek,rtd-gpio
>   Add GPIO support for Realtek DHC(Digital Home Center) RTD SoCs.
>
>  .../bindings/gpio/realtek,rtd-gpio.yaml       |  69 ++
>  drivers/gpio/Kconfig                          |  13 +
>  drivers/gpio/Makefile                         |   1 +
>  drivers/gpio/gpio-rtd.c                       | 604 ++++++++++++++++++
>  4 files changed, 687 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
>  create mode 100644 drivers/gpio/gpio-rtd.c
>
> --
> 2.43.0
>

I applied this series. For the future: the commit subject should have
the "gpio: rtd: ..." prefix. I added it this time.

Bart