Re: [PATCH v2 00/11] renesas: rzg3s: Add support for Ethernet

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Thu,  7 Dec 2023 09:06:49 +0200 you wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Hi,
> 
> Series adds Ethernet support for Renesas RZ/G3S.
> Along with it preparatory cleanups and fixes were included.
> 
> [...]

Here is the summary with links:
  - [v2,01/11] clk: renesas: rzg2l-cpg: Check reset monitor registers
    (no matching commit)
  - [v2,02/11] clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and ETH1
    (no matching commit)
  - [v2,03/11] pinctrl: renesas: rzg2l: Move arg and index in the main function block
    (no matching commit)
  - [v2,04/11] pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups
    (no matching commit)
  - [v2,05/11] pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins
    (no matching commit)
  - [v2,06/11] pinctrl: renesas: rzg2l: Add output enable support
    (no matching commit)
  - [v2,07/11] pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
    (no matching commit)
  - [v2,08/11] dt-bindings: net: renesas,etheravb: Document RZ/G3S support
    https://git.kernel.org/netdev/net-next/c/060baa9b90d4
  - [v2,09/11] arm64: renesas: r9a08g045: Add the Ethernet nodes
    (no matching commit)
  - [v2,10/11] arm64: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
    (no matching commit)
  - [v2,11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html