[PATCH v7 21/22] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices

[Dmitry Baryshkov]

The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.

Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index cc94942db468..bcc7ceb648ff 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -353,31 +353,26 @@ acc3: power-manager@b0b8000 {
 		saw0: power-manager@b089000 {
 			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw1: power-manager@b099000 {
 			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw2: power-manager@b0a9000 {
 			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw3: power-manager@b0b9000 {
 			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw_l2: power-manager@b012000 {
 			compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2";
 			reg = <0xb012000 0x1000>;
-			regulator;
 		};
 
 		blsp1_uart1: serial@78af000 {

-- 
2.39.2