[PATCH 2/2] drm/panel: samsung-s6d7aa0: drop DRM_BUS_FLAG_DE_HIGH for lsl080al02

[Artur Weber]

It turns out that I had misconfigured the device I was using the panel
with; the bus data polarity is not high for this panel, I had to change
the config on the display controller's side.

Fix the panel config to properly reflect its accurate settings.

Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
index ea5a85779382..f23d8832a1ad 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
@@ -309,7 +309,7 @@ static const struct s6d7aa0_panel_desc s6d7aa0_lsl080al02_desc = {
 	.off_func = s6d7aa0_lsl080al02_off,
 	.drm_mode = &s6d7aa0_lsl080al02_mode,
 	.mode_flags = MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_NO_HFP,
-	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.bus_flags = 0,
 
 	.has_backlight = false,
 	.use_passwd3 = false,

-- 
2.43.0