Re: [PATCH v5 0/4] drm/solomon: Add support for the SSD133x controller family

[Javier Martinez Canillas]

Javier Martinez Canillas <javierm@xxxxxxxxxx> writes:

> Hello,
>
> This patch-set adds support for the family of SSD133x Solomon controllers,
> such as the SSD1331. These are used for RGB Dot Matrix OLED/PLED panels.
>
> This is a v5 that is basically the same than the previous v4 but dropping
> support for I2C since the ssd133x family does not support that interface.
>
> The patches were tested on a Waveshare SSD1331 display using glmark2-drm,
> fbcon, fbtests and the retroarch emulator. The binding schema were tested
> using the `make W=1 dt_binding_check` target.
>
> Patch #1 and #2 are fixes for the DT binding schema of the existing SSD130x
> and SSD132x families.
>
> Patch #3 adds a DT binding schema for the SSD133x controllers and patch #4
> extends the ssd130x DRM driver to support the SSD133x controller family.
>
> Best regards,
> Javier

Pushed to drm-misc (drm-misc-next). Thanks!

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat