Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp: Fix PCIe PHY power-domains

From: Konrad Dybcio
Date: Fri Dec 29 2023 - 08:08:38 EST


On 29.12.2023 12:24, Johan Hovold wrote:
> On Wed, Dec 27, 2023 at 11:28:26PM +0100, Konrad Dybcio wrote:
>> The PCIe GDSCs are only related to the RCs. The PCIe PHYs on the other
>> hand, are powered by VDD_MX and their specific VDDA_PHY/PLL regulators.
>
> No, that does not seem to be entirely correct. I added the power-domains
> here precisely because they were needed to enable the PHYs.
>
> This is something I stumbled over when trying to figure out how to
> add support for the second lane pair (i.e. four-lane mode), and I just
> went back and confirmed that this is still the case.
>
> If you try to enable one of these PHYs without the corresponding GDSC
> being enabled, you end up with:
>
> [ 37.709324] ------------[ cut here ]------------
> [ 37.718196] gcc_pcie_3b_aux_clk status stuck at 'off'
> [ 37.718205] WARNING: CPU: 4 PID: 482 at drivers/clk/qcom/clk-branch.c:86 clk_branch_wait+0x144/0x15c
>
> Now, you may or may not want to describe the above in the devicetree,
> but this makes it sound like you're trying to work around an issue with
> the current Linux implementation.
Could you please recheck this with patch 1 from [1] applied?

Konrad

[1] https://lore.kernel.org/linux-arm-msm/20231227-topic-8280_pcie-v1-1-095491baf9e4@xxxxxxxxxx/T/#u