[PATCH v2 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101

[Tudor Ambarus]

GS101's Connectivity Peripheral blocks (peric0/1 blocks) which
include the I3C and USI (I2C, SPI, UART) only allow 32-bit
register accesses.

Instead of specifying the reg-io-width = 4 everywhere, for each node,
the requirement should be deduced from the compatible.

Infer UPIO_MEM32 iotype from the "google,gs101-uart" compatible.
Update the uart info name to be GS101 specific in order to
differentiate from the other exynos platforms. All the other settings
are not changed.

exynos_fifoszdt_serial_drv_data was replaced by gs101_serial_drv_data
because the iotype restriction is gs101 specific and there was no other
user of exynos_fifoszdt_serial_drv_data.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
v2: new patch

 drivers/tty/serial/samsung_tty.c | 38 +++++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 97ce4b2424af..938127179acf 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2497,25 +2497,43 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
 	.fifosize = { 256, 64, 64, 64 },
 };
 
-/*
- * Common drv_data struct for platforms that specify samsung,uart-fifosize in
- * device tree.
- */
-static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = {
-	EXYNOS_COMMON_SERIAL_DRV_DATA(),
+static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
+	.info = {
+		.name		= "Google GS101 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.iotype		= UPIO_MEM32,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	},
+	/* samsung,uart-fifosize must be specified in the device tree. */
 	.fifosize = { 0 },
 };
 
 #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
 #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
 #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
-#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data)
+#define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data)
 
 #else
 #define EXYNOS4210_SERIAL_DRV_DATA NULL
 #define EXYNOS5433_SERIAL_DRV_DATA NULL
 #define EXYNOS850_SERIAL_DRV_DATA NULL
-#define EXYNOS_FIFOSZDT_DRV_DATA NULL
+#define GS101_SERIAL_DRV_DATA NULL
 #endif
 
 #ifdef CONFIG_ARCH_APPLE
@@ -2603,7 +2621,7 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 		.driver_data	= (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
 	}, {
 		.name		= "gs101-uart",
-		.driver_data	= (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)GS101_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -2626,7 +2644,7 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
 	{ .compatible = "axis,artpec8-uart",
 		.data = ARTPEC8_SERIAL_DRV_DATA },
 	{ .compatible = "google,gs101-uart",
-		.data = EXYNOS_FIFOSZDT_DRV_DATA },
+		.data = GS101_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
-- 
2.43.0.472.g3155946c3a-goog