[PATCH] arm64: dts: rockchip: nanopc-t6 sdmmc device tuning

[John Clark]

1) sdmmc on the nanopc-t6 is powered by vcc3v3_sd_s0, not vcc_3v3_s3
   add the supply vcc3v3_sd_s0, and control it with gpio4_a5
2) add the card detection property gpio0_a4
3) drop max-frequency = <200000000> as it is already defined in rk3588s.dtsi
4) order no-sdio & no-mmc properties while we are here

Signed-off-by: John Clark <inindev@xxxxxxxxx>
---
 .../boot/dts/rockchip/rk3588-nanopc-t6.dts    | 27 ++++++++++++++++---
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index e83b71510a47..2360735e58a1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -159,6 +159,19 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_s0_pwren>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sd_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
 };
 
 &combphy0_ps {
@@ -503,6 +516,12 @@ pcie_m2_1_pwren: pcie-m21-pwren {
 		};
 	};
 
+	sdmmc {
+		sd_s0_pwren: sd-s0-pwren {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
 	usb {
 		typec5v_pwren: typec5v-pwren {
 			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -536,15 +555,15 @@ &sdhci {
 };
 
 &sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
+	no-mmc;
+	no-sdio;
 	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
+	vmmc-supply = <&vcc3v3_sd_s0>;
 	vqmmc-supply = <&vccio_sd_s0>;
 	status = "okay";
 };
-- 
2.43.0