Re: [PATCH v3 24/24] platform/chrome: cros_ec: Use PM subsystem to manage wakeirq

From: Tzung-Bi Shih
Date: Wed Dec 27 2023 - 01:27:09 EST


On Tue, Dec 26, 2023 at 12:21:28PM -0700, Mark Hasemeyer wrote:
> The cros ec driver is manually managing the wake IRQ by calling
> enable_irq_wake()/disable_irq_wake() during suspend/resume.
>
> Modify the driver to use the power management subsystem to manage the
> wakeirq.
>
> Rather than assuming that the IRQ is wake capable, use the underlying
> firmware/device tree to determine whether or not to enable it as a wake
> source. Some Chromebooks rely solely on the ec_sync pin to wake the AP
> but do not specify the interrupt as wake capable in the ACPI _CRS. For
> LPC/ACPI based systems a DMI quirk is introduced listing boards whose
> firmware should not be trusted to provide correct wake capable values.
> For device tree base systems, it is not an issue as the relevant device
> tree entries have been updated and DTS is built from source for each
> ChromeOS update.
>
> Signed-off-by: Mark Hasemeyer <markhas@xxxxxxxxxxxx>

The patch overall looks good to me.

With some minor comments:
Acked-by: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>

> diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c
[...]
> static int cros_ec_uart_acpi_probe(struct cros_ec_uart *ec_uart)
> {
[...]
> /* Retrieve GpioInt and translate it to Linux IRQ number */
> - ret = acpi_dev_gpio_irq_get(adev, 0);
> + ret = acpi_dev_get_gpio_irq_resource(adev, NULL, 0, &irqres);
> if (ret < 0)
> return ret;
>
> - ec_uart->irq = ret;
> - dev_dbg(&ec_uart->serdev->dev, "IRQ number %d\n", ec_uart->irq);
> + ec_uart->irq = irqres.start;

How about keep using `ret`?

> @@ -301,7 +306,14 @@ static int cros_ec_uart_probe(struct serdev_device *serdev)
>
> serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);
>
> - return cros_ec_register(ec_dev);
> + /* Register a new cros_ec device */
> + ret = cros_ec_register(ec_dev);
> + if (ret) {
> + dev_err(dev, "Couldn't register ec_dev (%d)\n", ret);
> + return ret;
> + }

It doesn't need the change after moving device_init_wakeup() and
dev_pm_set_wake_irq() into cros_ec_register().

Drop it?