Re: [PATCH v3] Bluetooth: Fix Bluetooth for BCM4377 on T2 Intel MacBooks

[Paul Menzel]

Dear Felix,


Thank you very much for the patch. I am adding Johan to Cc field.

Am 25.12.23 um 21:01 schrieb Felix Zhang:
> Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1
>
> with the BCM4377 chip.  When I boot up the computer, go into

Somehow a blank line snug in above.

> bluetoothctl, and then try to run commands like scan on, show, list,
> it returns "No default controller available."  I have tried reloading
> the

It’d be great if you reflowed for 75 characters per line (also below).

> kernel module, in which the log outputs "{Added,Removed} hci0
> (unconfigured)."  With this patch, I am able to use Bluetooth as
> normal
> without any errors regarding hci0 being unconfigured.  However, an
> issue is still present where sometimes hci_bcm4377 will have to be
> reloaded in order to get bluetooth to work.  I believe this was still
> present before the previously mentioned commit.
>
> Due to the bit HCI_QUIRK_USE_BDADDR_PROPERTY being always set in
> drivers/bluetooth/hci_bcm4377.c (line 2371), the chip would be left
> unconfigured on kernels compiled after commit 6945795bc81a
> ("Bluetooth:
> fix use-bdaddr-property quirk") due to a change in its logic.  On the
> M1 Macs, the device would be configured in the devicetree.  However,
> that is not the case on T2 Macs.  Because the bluetooth adapter is
> left
> unconfigured, it is not usable in the operating system.  In order to
> circumvent this issue, a flag is added to prevent the bit from being
> set on the BCM4377, while setting it on the other devices.
>
> Because I do not have an M1 device to test this patch on, I am not sure
> whether the patch breaks anything for said devices.  I would be very
> grateful if anyone is willing to test this patch on their M1 device.
>
> I would also like to thank Kerem Karabay <kekrby@xxxxxxxxx> for
> assisting me with this patch.
>
> Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
> Signed-off-by: Felix Zhang <mrman@xxxxxxxxxxxxx>
> ---
> v3:
> * Adjust the format to pass the CI (again).
> ---
>   drivers/bluetooth/hci_bcm4377.c | 6 +++++-
>   1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_bcm4377.c
> b/drivers/bluetooth/hci_bcm4377.c
> index a61757835695..5c6fef1aa0f6 100644
> --- a/drivers/bluetooth/hci_bcm4377.c
> +++ b/drivers/bluetooth/hci_bcm4377.c
> @@ -513,6 +513,7 @@ struct bcm4377_hw {
>   	unsigned long broken_ext_scan : 1;
>   	unsigned long broken_mws_transport_config : 1;
>   	unsigned long broken_le_coded : 1;
> +	unsigned long use_bdaddr_property : 1;
>   
>   	int (*send_calibration)(struct bcm4377_data *bcm4377);
>   	int (*send_ptb)(struct bcm4377_data *bcm4377,
> @@ -2368,7 +2369,8 @@ static int bcm4377_probe(struct pci_dev *pdev,
> const struct pci_device_id *id)
>   	hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
>   	hdev->setup = bcm4377_hci_setup;
>   
> -	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> +	if (bcm4377->hw->use_bdaddr_property)
> +		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>   	if (bcm4377->hw->broken_mws_transport_config)
>   		set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev-
> > quirks);
>   	if (bcm4377->hw->broken_ext_scan)
> @@ -2465,6 +2467,7 @@ static const struct bcm4377_hw
> bcm4377_hw_variants[] = {
>   		.has_bar0_core2_window2 = true,
>   		.broken_mws_transport_config = true,
>   		.broken_le_coded = true,
> +		.use_bdaddr_property = true,
>   		.send_calibration = bcm4378_send_calibration,
>   		.send_ptb = bcm4378_send_ptb,
>   	},
> @@ -2479,6 +2482,7 @@ static const struct bcm4377_hw
> bcm4377_hw_variants[] = {
>   		.clear_pciecfg_subsystem_ctrl_bit19 = true,
>   		.broken_mws_transport_config = true,
>   		.broken_le_coded = true,
> +		.use_bdaddr_property = true,
>   		.send_calibration = bcm4387_send_calibration,
>   		.send_ptb = bcm4378_send_ptb,
>   	},

The diff looks good, and it works for you.


Kind regards,

Paul