Re: [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet

[Krzysztof Kozlowski]

On 25/12/2023 14:23, Petre Rodan wrote:
> 
> hello Krzysztof,
> 
> On Mon, Dec 25, 2023 at 01:57:39PM +0100, Krzysztof Kozlowski wrote:
>> On 24/12/2023 15:34, Petre Rodan wrote:
>>> @@ -54,14 +57,6 @@ properties:
>>>        If not present the device is not reset during the probe.
>>>      maxItems: 1
>>>
>>> -  honeywell,pmin-pascal:
>>> -    description:
>>> -      Minimum pressure value the sensor can measure in pascal.
>>> -
>>> -  honeywell,pmax-pascal:
>>> -    description:
>>> -      Maximum pressure value the sensor can measure in pascal.
>>> -
>>>    honeywell,transfer-function:
>>>      description: |
>>>        Transfer function which defines the range of valid values delivered by the
>>> @@ -72,17 +67,52 @@ properties:
>>>      enum: [1, 2, 3]
>>>      $ref: /schemas/types.yaml#/definitions/uint32
>>>
>>> +  honeywell,pressure-triplet:
>>
>> Why not putting it just before existing properties?
> 
> I'd like to have pmin-pascal, pmax-pascal as the last two honeywell specific
> properties, since they are not to be used unless someone has custom silicon.
> so we will still have a block moved just like above.
> the most logic order is the one I proposed above:
> 
> honeywell,transfer-function:
> [..]
> honeywell,pressure-triplet:
> [..]
> honeywell,pmin-pascal:
> [..]
> honeywell,pmax-pascal:
> [..]
> 
> since the last 3 are tied together as we will see below.
> is there any reason you want this order to change?

I just don't get why moving the code instead of adding new property next
to them.

The order is often alphabetical.

> 
>>> +  honeywell,pmin-pascal:
>>> +    description:
>>> +      Minimum pressure value the sensor can measure in pascal.
>>> +      To be specified only if honeywell,pressure-triplet is not set.
>>
>> The last sentence is redundant - schema should enforce that.
> 
> when someone generates the dtbo files via
> 
> cpp -nostdinc -I include -I ${LINUX_SRC}/include/ -I arch -undef -x assembler-with-cpp ${file}.dts "${BUILD_DIR}/${file}.dts.preprocessed"
> dtc -@ -I dts -O dtb -o "${BUILD_DIR}/${file}.dtbo" "${BUILD_DIR}/${file}.dts.preprocessed"

And how this command matters? DT overlays are checked, so error is printed.

> 
> the schema is not checked in any way.

When I run `make` the schema is also not checked, so is it an argument
to add anything to the binding? No. Drop redundant text.

> so unless people can be bothered to understand the yaml intricacies in the
> bindings file, I feel they need to see that redundant information there, see below.



> 
>>> +oneOf:
>>> +  - required:
>>> +      - honeywell,pmin-pascal
>>> +      - honeywell,pmax-pascal
>>> +  - required:
>>> +      - honeywell,pressure-triplet
>>> +
>>> +allOf:
>>> +  - if:
>>> +      required:
>>> +        - honeywell,pressure-triplet
>>> +    then:
>>> +      properties:
>>> +        honeywell,pmin-pascal: false
>>> +        honeywell,pmax-pascal: false
>>
>> This allOf is not needed.
> 
> speaking for intricacies, if the allOf is removed, then a binding containing
> 
> honeywell,pmax-pascal = <840000>;
> honeywell,pressure-triplet = "0015PA";
> 
> would be considered to be correct by the schema, but that would be the incorrect
> result. so afaict allOf needs to stay, and so does the redundant text.

Really? Did you test it?

Best regards,
Krzysztof