Re: [PATCH v5 2/2] usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq

From: Thinh Nguyen
Date: Fri Dec 22 2023 - 17:14:41 EST


On Fri, Dec 22, 2023, Krishna Kurapati wrote:
> For wakeup to work, driver needs to enable interrupts that depict what is
> happening on the DP/DM lines. On QUSB targets, this is identified by
> qusb2_phy whereas on SoCs using Femto PHY, separate {dp,dm}_hs_phy_irq's
> are used instead.
>
> The implementation incorrectly names qusb2_phy interrupts as "hs_phy_irq".
> Clean this up so that driver would be using only qusb2/(dp & dm) for wakeup
> purposes.
>
> For devices running older kernels, this won't break any functionality
> because the interrupt configurations in QUSB2 PHY based SoCs is done
> by configuring QUSB2PHY_INTR_CTRL register in PHY address space and it was
> never armed properly right from the start.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index fdf6d5d3c2ad..dbd6a5b2b289 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -57,7 +57,7 @@ struct dwc3_acpi_pdata {
> u32 qscratch_base_offset;
> u32 qscratch_base_size;
> u32 dwc3_core_base_size;
> - int hs_phy_irq_index;
> + int qusb2_phy_irq_index;
> int dp_hs_phy_irq_index;
> int dm_hs_phy_irq_index;
> int ss_phy_irq_index;
> @@ -73,7 +73,7 @@ struct dwc3_qcom {
> int num_clocks;
> struct reset_control *resets;
>
> - int hs_phy_irq;
> + int qusb2_phy_irq;
> int dp_hs_phy_irq;
> int dm_hs_phy_irq;
> int ss_phy_irq;
> @@ -372,7 +372,7 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>
> static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> {
> - dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
>
> if (qcom->usb2_speed == USB_SPEED_LOW) {
> dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> @@ -389,7 +389,7 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> {
> - dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
>
> /*
> * Configure DP/DM line interrupts based on the USB2 device attached to
> @@ -542,19 +542,19 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> int irq;
> int ret;
>
> - irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
> - pdata ? pdata->hs_phy_irq_index : -1);
> + irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
> + pdata ? pdata->qusb2_phy_irq_index : -1);
> if (irq > 0) {
> /* Keep wakeup interrupts disabled until suspend */
> ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
> qcom_dwc3_resume_irq,
> IRQF_ONESHOT | IRQF_NO_AUTOEN,
> - "qcom_dwc3 HS", qcom);
> + "qcom_dwc3 QUSB2", qcom);
> if (ret) {
> - dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
> + dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret);
> return ret;
> }
> - qcom->hs_phy_irq = irq;
> + qcom->qusb2_phy_irq = irq;
> }
>
> irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
> @@ -1058,7 +1058,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
> .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
> .qscratch_base_size = SDM845_QSCRATCH_SIZE,
> .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> - .hs_phy_irq_index = 1,
> + .qusb2_phy_irq_index = 1,
> .dp_hs_phy_irq_index = 4,
> .dm_hs_phy_irq_index = 3,
> .ss_phy_irq_index = 2
> @@ -1068,7 +1068,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
> .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
> .qscratch_base_size = SDM845_QSCRATCH_SIZE,
> .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> - .hs_phy_irq_index = 1,
> + .qusb2_phy_irq_index = 1,
> .dp_hs_phy_irq_index = 4,
> .dm_hs_phy_irq_index = 3,
> .ss_phy_irq_index = 2,
> --
> 2.42.0
>

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh