[PATCH v2 03/16] serial: sc16is7xx: set safe default SPI clock frequency

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

15 MHz is supported only by 76x variants.

If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.

Also use HZ_PER_MHZ macro to improve readability.

Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 798fa115b28a..ced2446909a2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
 #include <linux/tty_flip.h>
 #include <linux/spi/spi.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 #include <uapi/linux/sched/types.h>
 
 #define SC16IS7XX_NAME			"sc16is7xx"
@@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
 		return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
 
 	spi->mode		= spi->mode ? : SPI_MODE_0;
-	spi->max_speed_hz	= spi->max_speed_hz ? : 15000000;
+	spi->max_speed_hz	= spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
 	ret = spi_setup(spi);
 	if (ret)
 		return ret;
-- 
2.39.2