[PATCH v1 2/8] dt-bindings: display: add dt-bindings for STM32 LVDS device

[Raphael Gallais-Pou]

Add dt-binding file for "st,stm32-lvds" compatible.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx>
---
 .../bindings/display/st,stm32-lvds.yaml       | 114 ++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/st,stm32-lvds.yaml

diff --git a/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
new file mode 100644
index 000000000000..d72c9088133c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+  - Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx>
+  - Yannick Fertre <yannick.fertre@xxxxxxxxxxx>
+
+description: |
+  The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+  LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+  onto the LVDS PHY.
+
+  It regroups three sub blocks:
+    - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+      pixels onto the data lanes of the PHY
+    - LVDS PHY: parallelize the data and drives the LVDS data lanes
+    - LVDS wrapper: handles top-level settings
+
+  The LVDS controller driver supports the following high-level features:
+    - FDP-Link-I and OpenLDI (v0.95) protocols
+    - Single-Link or Dual-Link operation
+    - Single-Display or Double-Display (with the same content duplicated on both)
+    - Flexible Bit-Mapping, including JEIDA and VESA
+    - RGB888 or RGB666 output
+    - Synchronous design, with one input pixel per clock cycle
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: st,stm32-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB peripheral clock
+      - description: Reference clock for the internal PLL
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          LVDS input port node, connected to the LTDC RGB output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          LVDS output port node, connected to a panel or bridge input port.
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/bus/stm32mp25_sys_bus.h>
+    #include <dt-bindings/clock/stm32mp25-clks.h>
+    #include <dt-bindings/reset/stm32mp25-resets.h>
+
+    lvds: lvds@48060000 {
+        #clock-cells = <0>;
+        compatible = "st,stm32-lvds";
+        reg = <0x48060000 0x2000>;
+        clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+        clock-names = "pclk", "ref";
+        resets = <&rcc LVDS_R>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds_in: endpoint {
+                   remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                lvds_out0: endpoint {
+                   remote-endpoint = <&lvds_panel_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.25.1