[PATCH 6/6] arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1

[Alain Volmat]

Add properties for spi3 and spi8 available on the stm32mp257f-ev1.
Both are kept disabled since only used via the gpio expansion connector.

Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index b2d3afb15758..1ea3c82ca477 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -68,6 +68,20 @@ &sdmmc1 {
 	status = "okay";
 };
 
+&spi3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi3_pins_a>;
+	pinctrl-1 = <&spi3_sleep_pins_a>;
+	status = "disabled";
+};
+
+&spi8 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi8_pins_a>;
+	pinctrl-1 = <&spi8_sleep_pins_a>;
+	status = "disabled";
+};
+
 &usart2 {
 	pinctrl-names = "default", "idle", "sleep";
 	pinctrl-0 = <&usart2_pins_a>;
-- 
2.25.1