[PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

[Sneh Shah]

Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.

Signed-off-by: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 31 +++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index d3bf42d0fceb..b3a28dc19161 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -21,6 +21,7 @@
 #define RGMII_IO_MACRO_CONFIG2		0x1C
 #define RGMII_IO_MACRO_DEBUG1		0x20
 #define EMAC_SYSTEM_LOW_POWER_DEBUG	0x28
+#define ETHQOS_MAC_AN_CTRL		0xE0
 
 /* RGMII_IO_MACRO_CONFIG fields */
 #define RGMII_CONFIG_FUNC_CLK_EN		BIT(30)
@@ -78,6 +79,10 @@
 #define ETHQOS_MAC_CTRL_SPEED_MODE		BIT(14)
 #define ETHQOS_MAC_CTRL_PORT_SEL		BIT(15)
 
+/*ETHQOS_MAC_AN_CTRL bits */
+#define ETHQOS_MAC_AN_CTRL_RAN			BIT(9)
+#define ETHQOS_MAC_AN_CTRL_ANE			BIT(12)
+
 struct ethqos_emac_por {
 	unsigned int offset;
 	unsigned int value;
@@ -109,6 +114,7 @@ struct qcom_ethqos {
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
+	unsigned int serdes_speed;
 };
 
 static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -600,27 +606,47 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
 
 static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 {
-	int val;
-
+	int val, mac_an_value;
 	val = readl(ethqos->mac_base + MAC_CTRL_REG);
+	mac_an_value = readl(ethqos->mac_base + ETHQOS_MAC_AN_CTRL);
 
 	switch (ethqos->speed) {
+	case SPEED_2500:
+		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
+		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_2500)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		mac_an_value &= ~ETHQOS_MAC_AN_CTRL_ANE;
+		break;
 	case SPEED_1000:
 		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
 		break;
 	case SPEED_100:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
 		break;
 	case SPEED_10:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL;
 		val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
 		break;
 	}
 
 	writel(val, ethqos->mac_base + MAC_CTRL_REG);
+	writel(mac_an_value, ethqos->mac_base + ETHQOS_MAC_AN_CTRL);
+	ethqos->serdes_speed = ethqos->speed;
 
 	return val;
 }
@@ -789,6 +815,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to get serdes phy\n");
 
 	ethqos->speed = SPEED_1000;
+	ethqos->serdes_speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);
 
-- 
2.17.1