[PATCH] arm64: dts: rockchip: configure pad driver strength for orangepi r1 plus lts

[Tianling Shen]

The default strength is not enough to provide stable connection
under 3.3v LDO voltage.

Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")

Cc: stable@xxxxxxxxxxxxxxx # 6.6+
Signed-off-by: Tianling Shen <cnsztl@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@ yt8531c: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
-- 
2.43.0