Re: [PATCH v5 00/22] Add support for the Mobileye EyeQ5 SoC

[Gregory CLEMENT]

Hello Thomas,

> Hello,
>
> The EyeQ5 SoC from Mobileye is based on the MIPS I6500 architecture
> and features multiple controllers such as the classic UART, I2C, SPI,
> as well as CAN-FD, PCIe, Octal/Quad SPI Flash interface, Gigabit
> Ethernet, MIPI CSI-2, and eMMC 5.1. It also includes a Hardware
> Security Module, Functional Safety Hardware, and MJPEG encoder.
>
> One peculiarity of this SoC is that the physical address of the DDDR
> exceeds 32 bits. Given that the architecture is 64 bits, this is not
> an issue, but it requires some changes in how the mips64 is currently
> managed during boot.
>
> In this fifth version, there aren't many changes, mostly just tweaking
> commit messages based on Sergey's feedback and fixing up the code
> style. But, the real reason for this series is a bit of a whoopsie on
> my end. It turns out, despite what I confidently claimed in the last
> round, some configuration tweaks were missing. All sorted now, though!
>

A few weeks ago, you were concerned about the introduction of the
specific kconfig CONFIG_USE_XKPHYS to support EyeQ5, and you wanted us
to set up a new platform instead. Since then, Jiaxun proposed a series
that was merged here to provide more generic support.

I had other issues in the initial series, and I think that now I've
fixed all of them. So, I would like to know what your opinion is now
about this series.

Will you accept it, or do you still think that a new platform has to be
set up?

Regards,

Gregory

> To build and test the kernel, we need to run the following commands:
>
> make 64r6el_defconfig BOARDS=eyeq5
> make vmlinuz.itb
>
> Changelog:
>
>  v4 -> v5:
>
>    - Improve commit messages for patch 3, 5, 12 and 13.
>
>    - Fix style in patch 9
>
>    - Really enable SPARSMEM and use correct address in
>      board-eyeq5.config in patch 21
>
>  v3 -> v4:
>
>  - Fix build warning in "MIPS: Get rid of CONFIG_NO_EXCEPT_FILL":
>    check that we are in 64bit mode before using KSEG0 that exist only
>    in this mode.
>
>  - Modify "MIPS: spaces: Define a couple of handy macros" to be
>    buildable in 32bit mode.
>
>  - Use correct format specifier to print address in "MIPS: traps: Give
>    more explanations if ebase doesn't belong to KSEG0"
>
>  - In "MIPS: generic: Add support for Mobileye EyeQ5",remove
>    CONFIG_ZBOOT_LOAD_ADDRESS from board-eyeq5.config, (as well as
>    CONFIG_USE_XKPHYS that does not exist anymore) and add
>    CONFIG_SPARSEMEM_MANUAL to enable SPARSMEM.
>
> v2 -> v3
>
>  - Added more reviewed-by and acked-by tags
>
>  - Fix sorting for cpus entries in
>
>  - Fix indentation issue in Documentation/devicetree/bindings/mips/mobileye.yaml
>
>  v1 -> v2
>
>  - Added reviewed-by and acked-by tags
>
>  - Fix typos reported
>
>  - In patch 15 use 'img' vendor string instead of mti
>
>  - In patch 16 modify licence
>
>  - In patch 17 give more explanations about the block usage.
>
>  - In patch 18, remove _ in node names, don't use anymore
>    CONFIG_BUILTIN_DTB in Makefile, remove macro, modify licence.
>
>  - In patch 19 remove most of the bootargs and only keeps earlycon. I
>    also split the memory in 2 part in the device tree.
>
>  - Integrate the series from Jiaxun Yang
>    https://lore.kernel.org/linux-mips/20231027221106.405666-1-jiaxun.yang@xxxxxxxxxxx/
>
>   They are patches 2 to 6 and 8 to 12
>
>   Then I added patch 7 to fix the cache issue visible on the Mobileye
>   platform, I also add patch 13 to improve warning message when ebase
>   doesn't belong to KSEG0
>
> Regards,
>
> Gregory
>
> Gregory CLEMENT (13):
>   MIPS: compressed: Use correct instruction for 64 bit code
>   MIPS: spaces: Define a couple of handy macros
>   MIPS: Fix cache issue with mips_cps_core_entry
>   MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0
>   dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd.
>   dt-bindings: mips: cpus: Sort the entries
>   dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core
>   dt-bindings: mips: Add bindings for Mobileye SoCs
>   dt-bindings: mfd: syscon: Document EyeQ5 OLB
>   MIPS: mobileye: Add EyeQ5 dtsi
>   MIPS: mobileye: Add EPM5 device tree
>   MIPS: generic: Add support for Mobileye EyeQ5
>   MAINTAINERS: Add entry for Mobileye MIPS SoCs
>
> Jiaxun Yang (9):
>   MIPS: Export higher/highest relocation functions in uasm
>   MIPS: genex: Fix except_vec_vi for kernel in XKPHYS
>   MIPS: Fix set_uncached_handler for ebase in XKPHYS
>   MIPS: Refactor mips_cps_core_entry implementation
>   MIPS: Allow kernel base to be set from Kconfig for all platforms
>   MIPS: traps: Handle CPU with non standard vint offset
>   MIPS: Avoid unnecessary reservation of exception space
>   MIPS: traps: Enhance memblock ebase allocation process
>   MIPS: Get rid of CONFIG_NO_EXCEPT_FILL
>
>  .../devicetree/bindings/mfd/syscon.yaml       |   1 +
>  .../devicetree/bindings/mips/cpus.yaml        |  13 +-
>  .../devicetree/bindings/mips/mobileye.yaml    |  32 ++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  MAINTAINERS                                   |  12 +
>  arch/mips/Kconfig                             |  26 +-
>  arch/mips/boot/compressed/head.S              |   4 +-
>  arch/mips/boot/dts/Makefile                   |   1 +
>  arch/mips/boot/dts/mobileye/Makefile          |   4 +
>  arch/mips/boot/dts/mobileye/eyeq5-epm5.dts    |  24 ++
>  .../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 292 ++++++++++++++++++
>  arch/mips/boot/dts/mobileye/eyeq5.dtsi        | 134 ++++++++
>  arch/mips/configs/generic/board-eyeq5.config  |  42 +++
>  arch/mips/generic/Kconfig                     |  15 +
>  arch/mips/generic/Platform                    |   2 +
>  arch/mips/generic/board-epm5.its.S            |  24 ++
>  arch/mips/include/asm/addrspace.h             |   5 +
>  arch/mips/include/asm/mach-generic/spaces.h   |   2 +
>  arch/mips/include/asm/mips-cm.h               |   1 +
>  arch/mips/include/asm/smp-cps.h               |   4 +-
>  arch/mips/include/asm/traps.h                 |   1 -
>  arch/mips/include/asm/uasm.h                  |   2 +
>  arch/mips/kernel/cps-vec.S                    | 110 +++----
>  arch/mips/kernel/cpu-probe.c                  |   5 -
>  arch/mips/kernel/cpu-r3k-probe.c              |   2 -
>  arch/mips/kernel/genex.S                      |  19 +-
>  arch/mips/kernel/head.S                       |   7 +-
>  arch/mips/kernel/smp-cps.c                    | 171 ++++++++--
>  arch/mips/kernel/traps.c                      |  90 ++++--
>  arch/mips/mm/uasm.c                           |   6 +-
>  30 files changed, 894 insertions(+), 159 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mips/mobileye.yaml
>  create mode 100644 arch/mips/boot/dts/mobileye/Makefile
>  create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
>  create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
>  create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
>  create mode 100644 arch/mips/configs/generic/board-eyeq5.config
>  create mode 100644 arch/mips/generic/board-epm5.its.S
>
> -- 
> 2.42.0
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com