Re: [PATCH v4 3/5] iommu/arm-smmu: add ACTLR data and support for SM8550
From: Robin Murphy
Date: Fri Dec 15 2023 - 07:54:58 EST
On 2023-12-15 12:20 pm, Bibek Kumar Patro wrote:
On 12/15/2023 4:14 PM, Dmitry Baryshkov wrote:
On Fri, 15 Dec 2023 at 12:19, Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:
Add ACTLR data table for SM8550 along with support for
same including SM8550 specific implementation operations.
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 89 ++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index cb49291f5233..d2006f610243 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -20,6 +20,85 @@ struct actlr_config {
u32 actlr;
};
+/*
+ * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
+ * macro TLB) and BIT(1) as CPRE (Enable context caching in the
prefetch
+ * buffer). The remaining bits are implementation defined and vary
across
+ * SoCs.
+ */
+
+#define PREFETCH_DEFAULT 0
+#define PREFETCH_SHALLOW BIT(8)
+#define PREFETCH_MODERATE BIT(9)
+#define PREFETCH_DEEP (BIT(9) | BIT(8))
I thin the following might be more correct:
#include <linux/bitfield.h>
#define PREFETCH_MASK GENMASK(9, 8)
#define PREFETCH_DEFAULT FIELD_PREP(PREFETCH_MASK, 0)
#define PREFETCH_SHALLOW FIELD_PREP(PREFETCH_MASK, 1)
#define PREFETCH_MODERATE FIELD_PREP(PREFETCH_MASK, 2)
#define PREFETCH_DEEP FIELD_PREP(PREFETCH_MASK, 3)
Ack, thanks for this suggestion. Let me try this out using
GENMASK. Once tested, will take care of this in next version.
FWIW the more typical usage would be to just define the named macros for
the raw field values, then put the FIELD_PREP() at the point of use.
However in this case that's liable to get pretty verbose, so although
I'm usually a fan of bitfield.h, the most readable option here might
actually be to stick with simpler definitions of "(0 << 8)", "(1 << 8)",
etc. However it's not really a big deal either way, and I defer to
whatever Dmitry and Konrad prefer, since they're the ones looking after
arm-smmu-qcom the most :)
Thanks,
Robin.
Thanks,
Bibek
+#define PREFETCH_SWITCH_GFX (BIT(5) | BIT(3))
+#define CPRE BIT(1)
+#define CMTLB BIT(0)
+
+static const struct actlr_config sm8550_apps_actlr_cfg[] = {
+ { 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
+ { 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
+ { 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
+ { 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
+ { 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+ { 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
+ { 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ { 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+ {},
+};
+
+static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
+ { 0x0000, 0x03ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE
| CMTLB },
+ {},
+};
+
static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
{
return container_of(smmu, struct qcom_smmu, smmu);
@@ -549,6 +628,15 @@ static const struct qcom_smmu_match_data
sdm845_smmu_500_data = {
/* Also no debug configuration. */
};
+
+static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
+ .impl = &qcom_smmu_500_impl,
+ .adreno_impl = &qcom_adreno_smmu_500_impl,
+ .cfg = &qcom_smmu_impl0_cfg,
+ .actlrcfg = sm8550_apps_actlr_cfg,
+ .actlrcfg_gfx = sm8550_gfx_actlr_cfg,
+};
+
static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
.impl = &qcom_smmu_500_impl,
.adreno_impl = &qcom_adreno_smmu_500_impl,
@@ -583,6 +671,7 @@ static const struct of_device_id __maybe_unused
qcom_smmu_impl_of_match[] = {
{ .compatible = "qcom,sm8250-smmu-500", .data =
&qcom_smmu_500_impl0_data },
{ .compatible = "qcom,sm8350-smmu-500", .data =
&qcom_smmu_500_impl0_data },
{ .compatible = "qcom,sm8450-smmu-500", .data =
&qcom_smmu_500_impl0_data },
+ { .compatible = "qcom,sm8550-smmu-500", .data =
&sm8550_smmu_500_impl0_data },
{ .compatible = "qcom,smmu-500", .data =
&qcom_smmu_500_impl0_data },
{ }
};
--
2.17.1