Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it

From: Thomas Gleixner
Date: Fri Dec 15 2023 - 05:56:18 EST


On Fri, Dec 15 2023 at 13:24, Serge Semin wrote:
> On Fri, Dec 15, 2023 at 09:09:09AM +0100, Thomas Gleixner wrote:
>> On Sat, Dec 05 2020 at 22:58, Linus Walleij wrote:
>> > Sorry for top posting but I need the help of the irqchip maintainer
>> > Marc Z to hash this out.
>> >
>> > The mask/unmask/disable/enable semantics is something that
>> > you need to work with every day to understand right.
>>
>> The patch is correct.
>>
>> The irq_enable() callback is required to be a superset of
>> irq_unmask(). I.e. the core code expects it to do:
>>
>> 1) Some preparatory work to enable the interrupt line
>>
>> 2) Unmask the interrupt, which is why the masked state is cleared
>> by the core after invoking the irq_enable() callback.
>>
>> #2 is pretty obvious because if an interrupt chip does not implement the
>> irq_enable() callback the core defaults to irq_unmask()
>>
>> Correspondingly the core expects from the irq_disable() callback:
>>
>> 1) To mask the interrupt
>>
>> 2) To do some extra work to disable the interrupt line
>>
>> Same reasoning as above vs. #1 as the core fallback is to invoke the
>> irq_unmask() callback when the irq_disable() callback is not
>> implemented.
>
> Just curious. Wouldn't that be more correct/portable for the core to
> call both callbacks when it's required and if both are provided? So
> the supersetness requirement would be no longer applied to the
> IRQ enable/disable callbacks implementation thus avoiding the code
> duplications in the low-level drivers.

We could do that, but there are chips which require atomicity of the
operations (#1/#2). Not sure whether it safes much.

Thanks,

tglx