[PATCH v8 12/14] net: phy: at803x: configure qca8084 common clocks

[Luo Jie]

After initial clock sequence, the clock source 312.5MHZ is
available, the common clocks based on clock source 312.5MHZ
needs to be configured, which includes APB bridge clock tree
with rate 312.5MHZ, AHB clock tree with 104.17MHZ.

Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
 drivers/net/phy/at803x.c | 69 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 9885a728c72a..3ef4eacf40c7 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -340,6 +340,14 @@ static struct at803x_hw_stat qca83xx_hw_stats[] = {
 };
 
 enum {
+	APB_BRIDGE_CLK,
+	AHB_CLK,
+	SEC_CTRL_AHB_CLK,
+	TLMM_CLK,
+	TLMM_AHB_CLK,
+	CNOC_AHB_CLK,
+	MDIO_AHB_CLK,
+	MDIO_MASTER_AHB_CLK,
 	SRDS0_SYS_CLK,
 	SRDS1_SYS_CLK,
 	GEPHY0_SYS_CLK,
@@ -363,6 +371,14 @@ enum {
 };
 
 static const char *const qca8084_clock_name[] = {
+	"apb_bridge",
+	"ahb",
+	"sec_ctrl_ahb",
+	"tlmm",
+	"tlmm_ahb",
+	"cnoc_ahb",
+	"mdio_ahb",
+	"mdio_master_ahb",
 	"srds0_sys",
 	"srds1_sys",
 	"gephy0_sys",
@@ -975,6 +991,53 @@ static int qca8084_clock_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca8084_common_clock_init(struct phy_device *phydev)
+{
+	struct at803x_priv *priv;
+	int ret = 0;
+
+	priv = phydev->priv;
+	/* Enable APB bridge tree clock */
+	ret = clk_set_rate(priv->clk[APB_BRIDGE_CLK], 312500000);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[APB_BRIDGE_CLK]);
+	if (ret)
+		return ret;
+
+	/* Enable AHB tree clocks */
+	ret = clk_set_rate(priv->clk[AHB_CLK], 104170000);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[AHB_CLK]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[SEC_CTRL_AHB_CLK]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[TLMM_CLK]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[TLMM_AHB_CLK]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[CNOC_AHB_CLK]);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk[MDIO_AHB_CLK]);
+	if (ret)
+		return ret;
+
+	return clk_prepare_enable(priv->clk[MDIO_MASTER_AHB_CLK]);
+}
+
 static int qca8084_probe(struct phy_device *phydev)
 {
 	int ret;
@@ -987,7 +1050,11 @@ static int qca8084_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return qca8084_clock_config(phydev);
+	ret = qca8084_clock_config(phydev);
+	if (ret)
+		return ret;
+
+	return qca8084_common_clock_init(phydev);
 }
 
 static int at803x_probe(struct phy_device *phydev)
-- 
2.42.0