Re: [PATCH v1 8/8] ARM: dts: aspeed: System1: PS, sensor and more

[Ninad Palsule]

Hello Krzysztof,

On 12/12/23 14:26, Krzysztof Kozlowski wrote:
> On 12/12/2023 17:40, Ninad Palsule wrote:
> > This drop adds following devices in the device tree.
> > - EEPROM/VPD
> > - Power supplies
> > - Humidity, pressure and temperature sensors.
> > - Trusted platform module(TPM) chip
> >
> > Tested:
> >      This board is tested using the simics simulator.
> >
> > Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx>
> > ---
> Don't mix DTS with drivers. DTS and drivers go via different subsystems
> and cannot have dependencies, so why DTS is patch #6, then driver #7 and
> now again DTS #7?
I have sent a driver patch as a separate patchset and removed it from 
this patchset.
> >   .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 76 +++++++++++++++++++
> >   1 file changed, 76 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> > index 75562aa63701..d960b938fe8d 100644
> > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
> > @@ -461,6 +461,11 @@ &kcs3 {
> >   &i2c0 {
> >   	status = "okay";
> >   
> > +	eeprom@50 {
> > +		compatible = "atmel,24c64";
> > +		reg = <0x50>;
> > +	};
> > +
> >   	regulator@60 {
> >   		compatible = "maxim,max8952";
> >   		reg = <0x60>;
> > @@ -655,6 +660,25 @@ pca0: pca9539@74 {
> >   
> >   &i2c2 {
> >   	status = "okay";
> > +
> > +	power-supply@58 {
> > +		compatible = "ibm,cffps";
> > +		reg = <0x58>;
> > +	};
> > +
> > +	power-supply@59 {
> > +		compatible = "ibm,cffps";
> > +		reg = <0x59>;
> > +	};
> > +
> > +	power-supply@5a {
> > +		compatible = "ibm,cffps";
> > +		reg = <0x5a>;
> > +	};
> Missing blank line

Fixed it.

Thanks for the review.

Regards,

Ninad

> > +	power-supply@5b {
> > +		compatible = "ibm,cffps";
> > +		reg = <0x5b>;
> > +	};
>
> Best regards,
> Krzysztof