Re: [PATCH 0/3] arm64: dts: ti: Add Itap Delay Value For High Speed DDR

[Kumar, Udit]

On 12/14/2023 4:37 PM, Bhavya Kapoor wrote:
> On 06/12/23 12:01 am, Kumar, Udit wrote:
> > Hi Bhavya
> >
> > On 12/1/2023 1:50 PM, Bhavya Kapoor wrote:
> > > This Series adds Itap Delay Value for DDR52 speed mode for eMMC in
> > > J7200 and for DDR50 speed mode for MMCSD in J721s2 and J784s4 SoC.
> > >
> > > Rebased to next-20231201
> > >
> > > Bhavya Kapoor (3):
> > >    arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed
> > >      mode
> > >    arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed
> > >      mode
> > >    arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed
> > >      mode
> >
> > Could you confirm, after adding itap values, above modes are working 
> > fine apart from
> >
> > mode detection.
> >
> > Thanks
> >
> > Udit
>
> Hi Udit, Below are the links to the test logs
>
> j7200 ddr52 - 
> https://gist.github.com/a0498981/f9b7b7d3592eaca591dec3e72de45585
>
> j721s2 ddr50 - 
> https://gist.github.com/a0498981/9861e1df3fe0fc7c050db4f7a8cc34b8
>
> j784s4 ddr50 - 
> https://gist.github.com/a0498981/7c598dd708424252e2629fe0c7458a6d
>
> Thanks
>
> ~B-Kapoor

Thanks for logs Bhavya,

With that for series

Reviewed-by: Udit Kumar <u-kumar1@xxxxxx>



> > > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 1 +
> > >   arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 1 +
> > >   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 1 +
> > >   3 files changed, 3 insertions(+)