Re: [PATCH v5 09/44] drm/connector: hdmi: Add RGB Quantization Range to the connector state

From: Dave Stevenson
Date: Thu Dec 14 2023 - 09:46:31 EST

Next message: kan . liang: "[PATCH V4 1/2] perf top: Use evsel's cpus to replace user_requested_cpus"
Previous message: Chengming Zhou: "Re: [PATCH 3/5] mm/zswap: refactor out __zswap_load()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 7 Dec 2023 at 15:50, Maxime Ripard <mripard@xxxxxxxxxx> wrote:
>
> HDMI controller drivers will need to figure out the RGB range they need
> to configure based on a mode and property values. Let's expose that in
> the HDMI connector state so drivers can just use that value.

Again a mention that we're also adding unit tests wouldn't be amiss.

> Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>

Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>

> ---
> drivers/gpu/drm/drm_atomic.c | 4 +-
> drivers/gpu/drm/drm_atomic_state_helper.c | 44 +++
> .../gpu/drm/tests/drm_atomic_state_helper_test.c | 335 +++++++++++++++++++++
> include/drm/drm_atomic_state_helper.h | 1 +
> include/drm/drm_connector.h | 6 +
> 5 files changed, 389 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 1465a7f09a0b..e4ad53e64e07 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -1143,9 +1143,11 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
> drm_printf(p, "\tcolorspace=%s\n", drm_get_colorspace_name(state->colorspace));
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
> - connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
> + connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
> drm_printf(p, "\tbroadcast_rgb=%s\n",
> drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
> + drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
> + }
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
> if (state->writeback_job && state->writeback_job->fb)
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 10d98620a358..4a7114978c47 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -31,6 +31,7 @@
> #include <drm/drm_connector.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_device.h>
> +#include <drm/drm_edid.h>
> #include <drm/drm_framebuffer.h>
> #include <drm/drm_plane.h>
> #include <drm/drm_print.h>
> @@ -636,6 +637,47 @@ int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
> }
> EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
>
> +static const struct drm_display_mode *
> +connector_state_get_mode(const struct drm_connector_state *conn_state)
> +{
> + struct drm_atomic_state *state;
> + struct drm_crtc_state *crtc_state;
> + struct drm_crtc *crtc;
> +
> + state = conn_state->state;
> + if (!state)
> + return NULL;
> +
> + crtc = conn_state->crtc;
> + if (!crtc)
> + return NULL;
> +
> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> + if (!crtc_state)
> + return NULL;
> +
> + return &crtc_state->mode;
> +}
> +
> +static bool hdmi_is_full_range(const struct drm_connector *connector,
> + const struct drm_connector_state *state)
> +{
> + const struct drm_display_info *display = &connector->display_info;
> + const struct drm_display_mode *mode =
> + connector_state_get_mode(state);
> +
> + if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_FULL)
> + return true;
> +
> + if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_LIMITED)
> + return false;
> +
> + if (!display->is_hdmi)
> + return true;
> +
> + return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
> +}
> +
> /**
> * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
> * @connector: DRM Connector
> @@ -656,6 +698,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
> struct drm_connector_state *new_state =
> drm_atomic_get_new_connector_state(state, connector);
>
> + new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
> +
> if (old_state->hdmi.broadcast_rgb != new_state->hdmi.broadcast_rgb) {
> struct drm_crtc *crtc = new_state->crtc;
> struct drm_crtc_state *crtc_state;
> diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> index 21e6f796ee13..7750c3d214a4 100644
> --- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> +++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> @@ -328,7 +328,342 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
> KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
> }
>
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to auto with a mode that isn't the
> + * VIC-1 mode, we will get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_AUTO);
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to auto with a VIC-1 mode, we will get
> + * a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_AUTO);
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to full with a mode that isn't the
> + * VIC-1 mode, we will get a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_FULL);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to full with a VIC-1 mode, we will get
> + * a full RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_FULL);
> +
> + KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to limited with a mode that isn't the
> + * VIC-1 mode, we will get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_LIMITED);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> +/*
> + * Test that for an HDMI connector, with an HDMI monitor, if the
> + * Broadcast RGB property is set to limited with a VIC-1 mode, we will
> + * get a limited RGB Quantization Range.
> + */
> +static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_atomic_state *state;
> + struct drm_display_mode *mode;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
> +
> + ret = drm_atomic_check_only(state);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = drm_atomic_get_connector_state(state, conn);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
> +
> + KUNIT_ASSERT_EQ(test,
> + conn_state->hdmi.broadcast_rgb,
> + DRM_HDMI_BROADCAST_RGB_LIMITED);
> +
> + KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_full_range);
> +}
> +
> static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
> + KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode_vic_1),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode),
> + KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
> { }
> diff --git a/include/drm/drm_atomic_state_helper.h b/include/drm/drm_atomic_state_helper.h
> index d59d2b3aef9a..8072ac18e536 100644
> --- a/include/drm/drm_atomic_state_helper.h
> +++ b/include/drm/drm_atomic_state_helper.h
> @@ -88,6 +88,7 @@ void
> __drm_atomic_helper_connector_destroy_state(struct drm_connector_state *state);
> void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
> struct drm_connector_state *state);
> +
> void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj,
> struct drm_private_state *state);
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3867a4c01b78..76eecd449fb8 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1066,6 +1066,12 @@ struct drm_connector_state {
> * Broadcast RGB selection value.
> */
> enum drm_hdmi_broadcast_rgb broadcast_rgb;
> +
> + /**
> + * @is_full_range: Is the output supposed to use a full
> + * RGB Quantization Range or not?
> + */
> + bool is_full_range;
> } hdmi;
> };
>
>
> --
> 2.43.0
>

Next message: kan . liang: "[PATCH V4 1/2] perf top: Use evsel's cpus to replace user_requested_cpus"
Previous message: Chengming Zhou: "Re: [PATCH 3/5] mm/zswap: refactor out __zswap_load()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]