Re: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver

[Jonathan Cameron]

On Wed, 13 Dec 2023 16:23:43 +0000
Conor Dooley <conor@xxxxxxxxxx> wrote:

> On Wed, Dec 13, 2023 at 10:47:21AM +0100, Mike Looijmans wrote:
> > Skeleton driver for the TI ADS1298 medical ADC. This device is
> > typically used for ECG and similar measurements. Supports data
> > acquisition at configurable scale and sampling frequency.  
> 
> I think the commit subject and body here were accidentally copy-pasted
> from the driver patch. Patches for bindings should avoid talking about
> drivers and focus on the harware (unless we are talking about LEDs or
> motors etc)
> 
> > 
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> > 
> > ---
> > 
> >  .../bindings/iio/adc/ti,ads1298.yaml          | 80 +++++++++++++++++++
> >  1 file changed, 80 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
> > new file mode 100644
> > index 000000000000..7a160ba721eb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
> > @@ -0,0 +1,80 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Texas Instruments' ads1298 medical ADC chips
> > +
> > +maintainers:
> > +  - Mike Looijmans <mike.looijmans@xxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - ti,ads1298
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  spi-cpha: true
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +
> > +  avdd-supply:
> > +    description:
> > +      Analog power supply, voltage between AVDD and AVSS. When providing a
> > +      symmetric +/- 2.5V, the regulator should report 5V.

Any precedence in tree for doing this?  I thought we had bindings that required negative
supplies to be specified separately if present - so this would need to be 2 
supplies. e.g.
https://elixir.bootlin.com/linux/v6.7-rc5/source/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml#L37


> > +
> > +  vref-supply:
> > +    description:
> > +      Optional reference voltage. If omitted, internal reference is used,
> > +      depending on analog supply this is 2.4 or 4V.  
> 
> It may be worth mentioning here what the conditions for the internal
> reference being 2.4 or 4 volts actually are.
> 
> > +
> > +  clocks:
> > +    description: Optional 2.048 MHz external source clock on CLK pin
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: clk  
> 
> Since you have only one clock, having clock-names (especially with a
> name like "clk") is pointless IMO.
> 
> Generally though, this patch looks good to me.
> 
> Cheers,
> Conor.
> 
> > +  interrupts:
> > +    description: Interrupt on DRDY pin, triggers on falling edge
> > +    maxItems: 1
> > +
> > +  label: true
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - avdd-supply
> > +  - interrupts
> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    spi {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        adc@1 {
> > +          reg = <1>;
> > +          compatible = "ti,ads1298";
> > +          label = "ads1298-1-ecg";
> > +          avdd-supply = <&reg_iso_5v_a>;
> > +          clock-names = "clk";
> > +          clocks = <&clk_ads1298>;
> > +          interrupt-parent = <&gpio0>;
> > +          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
> > +          spi-max-frequency = <20000000>;
> > +          spi-cpha;
> > +        };
> > +    };
> > +...
> > -- 
> > 2.34.1
> > 
> > 
> > Met vriendelijke groet / kind regards,
> > 
> > Mike Looijmans
> > System Expert
> > 
> > 
> > TOPIC Embedded Products B.V.
> > Materiaalweg 4, 5681 RJ Best
> > The Netherlands
> > 
> > T: +31 (0) 499 33 69 69
> > E: mike.looijmans@xxxxxxxx
> > W: www.topic.nl
> > 
> > Please consider the environment before printing this e-mail  
>