RE: [PATCH v1 06/16] clk: starfive: Add JH8100 System clock generator driver

From: Emil Renner Berthing
Date: Wed Dec 13 2023 - 07:05:25 EST


JeeHeng Sia wrote:
>
>
> > -----Original Message-----
> > From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> > Sent: Saturday, December 9, 2023 12:25 AM
> > To: JeeHeng Sia <jeeheng.sia@xxxxxxxxxxxxxxxx>; kernel@xxxxxxxx; conor@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> > krzysztof.kozlowski+dt@xxxxxxxxxx; paul.walmsley@xxxxxxxxxx; palmer@xxxxxxxxxxx; aou@xxxxxxxxxxxxxxxxx;
> > mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx; p.zabel@xxxxxxxxxxxxxx; emil.renner.berthing@xxxxxxxxxxxxx; Hal Feng
> > <hal.feng@xxxxxxxxxxxxxxxx>; Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> > Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; Leyfoon Tan
> > <leyfoon.tan@xxxxxxxxxxxxxxxx>
> > Subject: Re: [PATCH v1 06/16] clk: starfive: Add JH8100 System clock generator driver
> >
> > Sia Jee Heng wrote:
> > > Add support for JH8100 System clock generator.
> > >
> > > Signed-off-by: Sia Jee Heng <jeeheng.sia@xxxxxxxxxxxxxxxx>
> > > Reviewed-by: Ley Foon Tan <leyfoon.tan@xxxxxxxxxxxxxxxx>
> > > ---
> > > MAINTAINERS | 8 +
> > > drivers/clk/starfive/Kconfig | 9 +
> > > drivers/clk/starfive/Makefile | 1 +
> > > drivers/clk/starfive/clk-starfive-common.h | 9 +-
> > > drivers/clk/starfive/jh8100/Makefile | 3 +
> > > .../clk/starfive/jh8100/clk-starfive-jh8100.h | 11 +
> > > drivers/clk/starfive/jh8100/clk-sys.c | 455 ++++++++++++++++++
> > > 7 files changed, 495 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/clk/starfive/jh8100/Makefile
> > > create mode 100644 drivers/clk/starfive/jh8100/clk-starfive-jh8100.h
> > > create mode 100644 drivers/clk/starfive/jh8100/clk-sys.c
> > >
[...]
> > > diff --git a/drivers/clk/starfive/jh8100/Makefile b/drivers/clk/starfive/jh8100/Makefile
> > > new file mode 100644
> > > index 000000000000..af6a09e220d3
> > > --- /dev/null
> > > +++ b/drivers/clk/starfive/jh8100/Makefile
> > > @@ -0,0 +1,3 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +# StarFive JH8100 Clock
> > > +obj-$(CONFIG_CLK_STARFIVE_JH8100_SYS) += clk-sys.o
> >
> > This will name the module clk-sys, which is way too generic. Please name this
> > clk-starfive-jh8100-sys similar to the JH7110 drivers.
> Just realized that I haven't reply to this comment.
> I can't give it a longer name otherwise compiler will throw warning.
> That’s why ends up to use a shorter name and keep it under jh8100 folder.

I'm sorry, how does that make any sense? If the compiler can compile

drivers/clk/starfive/clk-starfive-jh7110-sys.c

just fine, then why would it have trouble with

drivers/clk/starfive/clk-starfive-jh8100-sys.c

/Emil