Re: [PATCH 15/16] arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints

[Dmitry Baryshkov]

On Tue, 28 Nov 2023 at 10:11, Tengfei Fan <quic_tengfan@xxxxxxxxxxx> wrote:
>
>
>
> 在 11/17/2023 6:32 PM, Dmitry Baryshkov 写道:
> > On 17/11/2023 12:18, Tengfei Fan wrote:
> >> Add nodes to support Type-C USB/DP functionality.
> >>
> >> On this platform, a Type-C redriver is added to the SuperSpeed graph.
> >>
> >> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> >> ---
> >>   arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 88 +++++++++++++++++++++-
> >>   1 file changed, 87 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> >> b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> >> index 6dc3040b9f76..f3c558dd40f1 100644
> >> --- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> >> +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> >> @@ -100,7 +100,15 @@
> >>                       reg = <1>;
> >>                       pmic_glink_ss_in: endpoint {
> >> -                        remote-endpoint = <&usb_1_dwc3_ss>;
> >> +                        remote-endpoint = <&redriver_ss_out>;
> >> +                    };
> >> +                };
> >> +
> >> +                port@2 {
> >> +                    reg = <2>;
> >> +
> >> +                    pmic_glink_sbu: endpoint {
> >> +                        remote-endpoint = <&fsa4480_sbu_mux>;
> >>                       };
> >>                   };
> >>               };
> >> @@ -519,6 +527,62 @@
> >>       };
> >>   };
> >> +&i2c_master_hub_0 {
> >> +    status = "okay";
> >> +};
> >> +
> >> +&i2c_hub_2 {
> >> +    status = "okay";
> >> +
> >> +    typec-mux@42 {
> >> +        compatible = "fcs,fsa4480";
> >> +        reg = <0x42>;
> >> +
> >> +        vcc-supply = <&vreg_bob1>;
> >> +
> >> +        mode-switch;
> >> +        orientation-switch;
> >> +
> >> +        port {
> >> +            fsa4480_sbu_mux: endpoint {
> >> +                remote-endpoint = <&pmic_glink_sbu>;
> >> +            };
> >> +        };
> >> +    };
> >> +
> >> +    typec-retimer@1c {
> >> +        compatible = "onnn,nb7vpq904m";
> >> +        reg = <0x1c>;
> >> +
> >> +        vcc-supply = <&vreg_l15b_1p8>;
> >> +
> >> +        orientation-switch;
> >> +        retimer-switch;
> >> +
> >> +        ports {
> >> +            #address-cells = <1>;
> >> +            #size-cells = <0>;
> >> +
> >> +            port@0 {
> >> +                reg = <0>;
> >> +
> >> +                redriver_ss_out: endpoint {
> >> +                    remote-endpoint = <&pmic_glink_ss_in>;
> >> +                };
> >> +            };
> >> +
> >> +            port@1 {
> >> +                reg = <1>;
> >> +
> >> +                redriver_ss_in: endpoint {
> >> +                    data-lanes = <3 2 1 0>;
> >> +                    remote-endpoint = <&usb_dp_qmpphy_out>;
> >> +                };
> >> +            };
> >> +        };
> >> +    };
> >> +};
> >> +
> >>   &gcc {
> >>       clocks = <&bi_tcxo_div2>, <&sleep_clk>,
> >>            <&pcie0_phy>,
> >> @@ -552,6 +616,16 @@
> >>       status = "okay";
> >>   };
> >> +&mdss_dp0 {
> >> +    status = "okay";
> >> +};
> >> +
> >> +&mdss_dp0_out {
> >> +    data-lanes = <0 1>;
> >
> > Why? Are you really limited to two lanes for DP by the hardware?
> I got confirmation from a colleague that it is right that limited to two
> lanes.

Excuse me, I missed your reply earlier. Is it 2 DP lanes and 2 SS USB
lanes? Or are there just 2 lanes which are shared between DP and SS
USB?

> >
> >> +    remote-endpoint = <&usb_dp_qmpphy_dp_in>;
> >> +};
> >> +
> >> +
> >>   &mdss_dsi0 {
> >>       vdda-supply = <&vreg_l3e_1p2>;
> >>       status = "okay";
> >> @@ -861,6 +935,18 @@
> >>       status = "okay";
> >>   };
> >> +&usb_dp_qmpphy_dp_in {
> >> +    remote-endpoint = <&mdss_dp0_out>;
> >> +};
> >> +
> >> +&usb_dp_qmpphy_out {
> >> +    remote-endpoint = <&redriver_ss_in>;
> >> +};
> >> +
> >> +&usb_dp_qmpphy_usb_ss_in {
> >> +    remote-endpoint = <&usb_1_dwc3_ss>;
> >> +};
> >> +
> >>   &xo_board {
> >>       clock-frequency = <76800000>;
> >>   };
> >
>
> --
> Thx and BRs,
> Tengfei Fan



-- 
With best wishes
Dmitry