Re: [PATCH v5 00/23] Introduce runtime modifiable Energy Model

[Dietmar Eggemann]

On 29/11/2023 12:08, Lukasz Luba wrote:
> Hi all,
> 
> This patch set adds a new feature which allows to modify Energy Model (EM)
> power values at runtime. It will allow to better reflect power model of
> a recent SoCs and silicon. Different characteristics of the power usage
> can be leveraged and thus better decisions made during task placement in EAS.
> 
> It's part of feature set know as Dynamic Energy Model. It has been presented
> and discussed recently at OSPM2023 [3]. This patch set implements the 1st
> improvement for the EM.
> 
> The concepts:
> 1. The CPU power usage can vary due to the workload that it's running or due
> to the temperature of the SoC. The same workload can use more power when the
> temperature of the silicon has increased (e.g. due to hot GPU or ISP).
> In such situation the EM can be adjusted and reflect the fact of increased
> power usage. That power increase is due to static power
> (sometimes called simply: leakage). The CPUs in recent SoCs are different.
> We have heterogeneous SoCs with 3 (or even 4) different microarchitectures.
> They are also built differently with High Performance (HP) cells or
> Low Power (LP) cells. They are affected by the temperature increase
> differently: HP cells have bigger leakage. The SW model can leverage that
> knowledge.
> 
> 2. It is also possible to change the EM to better reflect the currently
> running workload. Usually the EM is derived from some average power values
> taken from experiments with benchmark (e.g. Dhrystone). The model derived
> from such scenario might not represent properly the workloads usually running
> on the device. Therefore, runtime modification of the EM allows to switch to
> a different model, when there is a need.
> 
> 3. The EM can be adjusted after boot, when all the modules are loaded and
> more information about the SoC is available e.g. chip binning. This would help
> to better reflect the silicon characteristics. Thus, this EM modification
> API allows it now. It wasn't possible in the past and the EM had to be
> 'set in stone'.
> 
> More detailed explanation and background can be found in presentations
> during LPC2022 [1][2] or in the documentation patches.
> 
> Some test results.
> The EM can be updated to fit better the workload type. In the case below the EM
> has been updated for the Jankbench test on Pixel6 (running v5.18 w/ mainline backports
> for the scheduler bits). The Jankbench was run 10 times for those two configurations,
> to get more reliable data.
> 
> 1. Janky frames percentage
> +--------+-----------------+---------------------+-------+-----------+
> | metric |    variable     |       kernel        | value | perc_diff |
> +--------+-----------------+---------------------+-------+-----------+
> | gmean  | jank_percentage | EM_default          |  2.0  |   0.0%    |
> | gmean  | jank_percentage | EM_modified_runtime |  1.3  |  -35.33%  |
> +--------+-----------------+---------------------+-------+-----------+
> 
> 2. Avg frame render time duration
> +--------+---------------------+---------------------+-------+-----------+
> | metric |      variable       |       kernel        | value | perc_diff |
> +--------+---------------------+---------------------+-------+-----------+
> | gmean  | mean_frame_duration | EM_default          | 10.5  |   0.0%    |
> | gmean  | mean_frame_duration | EM_modified_runtime |  9.6  |  -8.52%   |
> +--------+---------------------+---------------------+-------+-----------+
> 
> 3. Max frame render time duration
> +--------+--------------------+---------------------+-------+-----------+
> | metric |      variable      |       kernel        | value | perc_diff |
> +--------+--------------------+---------------------+-------+-----------+
> | gmean  | max_frame_duration | EM_default          | 251.6 |   0.0%    |
> | gmean  | max_frame_duration | EM_modified_runtime | 115.5 |  -54.09%  |
> +--------+--------------------+---------------------+-------+-----------+
> 
> 4. OS overutilized state percentage (when EAS is not working)
> +--------------+---------------------+------+------------+------------+
> |    metric    |       wa_path       | time | total_time | percentage |
> +--------------+---------------------+------+------------+------------+
> | overutilized | EM_default          | 1.65 |   253.38   |    0.65    |
> | overutilized | EM_modified_runtime | 1.4  |   277.5    |    0.51    |
> +--------------+---------------------+------+------------+------------+
> 
> 5. All CPUs (Little+Mid+Big) power values in mW
> +------------+--------+---------------------+-------+-----------+
> |  channel   | metric |       kernel        | value | perc_diff |
> +------------+--------+---------------------+-------+-----------+
> |    CPU     | gmean  | EM_default          | 142.1 |   0.0%    |
> |    CPU     | gmean  | EM_modified_runtime | 131.8 |  -7.27%   |
> +------------+--------+---------------------+-------+-----------+
> 
> The time cost to update the EM decreased in this v5 vs v4:
> big: 5us vs 2us -> 2.6x faster
> mid: 9us vs 3us -> 3x faster
> little: 16us vs 16us -> no change

I guess this is entirely due to the changes in
em_dev_update_perf_domain()? Moving from per-OPP em_update_callback to
switching the entire table (pd->runtime_table) inside
em_dev_update_perf_domain()?

> We still have to update the inefficiency in the cpufreq framework, thus
> a bit of overhead will be there.
> 
> Changelog:
> v5:
> - removed 2 tables design
> - have only one table (runtime_table) used also in thermal (Wei, Rafael)

Until v4 you had 2 EM's, the static and the modifiable (runtime). Now in
v5 this changed to only have one, the modifiable. IMHO it would be
better to change the existing table to be modifiable rather than staring
with two EM's and then removing the static one. I assume you end up with
way less code changes and the patch-set will become easier to digest for
reviewers.

I would mention that 14/23 "PM: EM: Support late CPUs booting and
capacity adjustment" is a testcase for the modifiable EM build-in into
the code changes. This relies on the table being modifiable.

> - refactored update function and removed callback call for each opp
> - added faster EM table swap, using only the RCU pointer update
> - added memory allocation API and tracking with kref
> - avoid overhead for computing 'cost' for each OPP in update, it can be
>   pre-computed in device drivers EM earlier
> - add support for device drivers providing EM table
> - added API for computing 'cost' values in EM for EAS
> - added API for thermal/powercap to use EM (using RCU wrappers) 
> - switched to single allocation and 'state[]' array (Rafael)
> - changed documentation to align with current design
> - added helper API for computing cost values
> - simplified EM free in unregister path (thanks to kref)
> - split patch updating EM clients and changed them separetly
> - added seperate patch removing old static EM table
> - added EM debugfs change patch to dump the runtime_table
> - addressed comments in v4 for spelling/comments/headers
> - added review tags

[...]