Re: [PATCH v2 5/5] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Conor Dooley]

On Tue, Dec 12, 2023 at 07:51:50PM +0800, Luo Jie wrote:
> Update the yaml file for the new DTS properties.
> 
> 1. cmn-reference-clock for the CMN PLL source clock select.
> 2. clock-frequency for MDIO clock frequency config.
> 3. add uniphy AHB & SYS GCC clocks.
> 4. add reset-gpios for MDIO bus level reset.
> 
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>  .../bindings/net/qcom,ipq4019-mdio.yaml       | 157 +++++++++++++++++-
>  1 file changed, 153 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> index 3407e909e8a7..9546a6ad7841 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> @@ -20,6 +20,8 @@ properties:
>            - enum:
>                - qcom,ipq6018-mdio
>                - qcom,ipq8074-mdio
> +              - qcom,ipq9574-mdio
> +              - qcom,ipq5332-mdio
>            - const: qcom,ipq4019-mdio
>  
>    "#address-cells":
> @@ -30,19 +32,71 @@ properties:
>  
>    reg:
>      minItems: 1
> -    maxItems: 2
> +    maxItems: 5
>      description:
> -      the first Address and length of the register set for the MDIO controller.
> -      the second Address and length of the register for ethernet LDO, this second
> -      address range is only required by the platform IPQ50xx.
> +      the first Address and length of the register set for the MDIO controller,
> +      the optional second, third and fourth address and length of the register
> +      for ethernet LDO, these three address range are required by the platform
> +      IPQ50xx/IPQ5332/IPQ9574, the last address and length is for the CMN clock
> +      to select the reference clock.
> +
> +  reg-names:
> +    minItems: 1
> +    maxItems: 5
>  
>    clocks:
> +    minItems: 1
>      items:
>        - description: MDIO clock source frequency fixed to 100MHZ
> +      - description: UNIPHY0 AHB clock source frequency fixed to 100MHZ
> +      - description: UNIPHY1 AHB clock source frequency fixed to 100MHZ
> +      - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
> +      - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ
>  
>    clock-names:
> +    minItems: 1
>      items:
>        - const: gcc_mdio_ahb_clk
> +      - const: gcc_uniphy0_ahb_clk
> +      - const: gcc_uniphy1_ahb_clk
> +      - const: gcc_uniphy0_sys_clk
> +      - const: gcc_uniphy1_sys_clk

> +  cmn-reference-clock:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - 0   # CMN PLL reference internal 48MHZ
> +              - 1   # CMN PLL reference external 25MHZ
> +              - 2   # CMN PLL reference external 31250KHZ
> +              - 3   # CMN PLL reference external 40MHZ
> +              - 4   # CMN PLL reference external 48MHZ
> +              - 5   # CMN PLL reference external 50MHZ
> +              - 6   # CMN PLL reference internal 96MHZ

Why is this not represented by an element of the clocks property?

> +  clock-frequency:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - 12500000
> +              - 6250000
> +              - 3125000
> +              - 1562500
> +              - 781250
> +              - 390625
> +    description:
> +      The MDIO bus clock that must be output by the MDIO bus hardware,
> +      only the listed frequecies above can be configured, other frequency
> +      will cause malfunction. If absent, the default hardware value is used.

Likewise.

Your commit message contains a bullet point list of what you are doing,
but there's no explanation here for why custom properties are required
to provide clock information.

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature