[PATCH v2 1/3] dt-bindings: power: supply: Add Acer Aspire 1 EC

[Nikita Travkin]

Add binding for the EC found in the Acer Aspire 1 laptop.

Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
 .../bindings/power/supply/acer,aspire1-ec.yaml     | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml
new file mode 100644
index 000000000000..1fbf1272a00f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/acer,aspire1-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Acer Aspire 1 Embedded Controller
+
+maintainers:
+  - Nikita Travkin <nikita@xxxxxxx>
+
+description:
+  The Acer Aspire 1 laptop uses an embedded controller to control battery
+  and charging as well as to provide a set of misc features such as the
+  laptop lid status and HPD events for the USB Type-C DP alt mode.
+
+properties:
+  compatible:
+    const: acer,aspire1-ec
+
+  reg:
+    const: 0x76
+
+  interrupts:
+    maxItems: 1
+
+  acer,media-keys-on-top:
+    description: Configure the keyboard layout to use media features of
+      the fn row when the fn key is not pressed. The firmware may choose
+      to add this property when user selects the fn mode in the firmware
+      setup utility.
+    type: boolean
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@76 {
+            compatible = "acer,aspire1-ec";
+            reg = <0x76>;
+
+            interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+
+                port {
+                    ec_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp_out>;
+                    };
+                };
+            };
+        };
+    };

-- 
2.43.0