[PATCH v4 09/17] drm/mediatek: Support CSC in OVL

From: Hsiao Chien Sung
Date: Tue Dec 12 2023 - 07:20:59 EST

Next message: Hsiao Chien Sung: "[PATCH v4 10/17] drm/mediatek: Support more color formats in OVL"
Previous message: Hsiao Chien Sung: "[PATCH v4 15/17] drm/mediatek: Add missing plane settings when async update"
In reply to: Hsiao Chien Sung: "[PATCH v4 15/17] drm/mediatek: Add missing plane settings when async update"
Next in thread: Hsiao Chien Sung: "[PATCH v4 10/17] drm/mediatek: Support more color formats in OVL"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Support Color Transform Control (CSC) in Overlay to
do Y2R or R2R conversion.

Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 121 +++++++++++++++++++++++-
1 file changed, 118 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 66074c2d917c..7e217142d0c4 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -31,6 +31,7 @@
#define OVL_LAYER_SMI_ID_EN BIT(0)
#define OVL_BGCLR_SEL_IN BIT(2)
#define OVL_LAYER_AFBC_EN(n) BIT(4+n)
+#define OVL_OUTPUT_CLAMP BIT(26)
#define DISP_REG_OVL_ROI_BGCLR 0x0028
#define DISP_REG_OVL_SRC_CON 0x002c
#define DISP_REG_OVL_CON(n) (0x0030 + 0x20 * (n))
@@ -44,6 +45,23 @@
#define DISP_REG_OVL_RDMA_GMC(n) (0x00c8 + 0x20 * (n))
#define DISP_REG_OVL_ADDR_MT2701 0x0040
#define DISP_REG_OVL_CLRFMT_EXT 0x02D0
+#define DISP_REG_OVL_CLRFMT_EXT1 0x02D8
+#define OVL_CLRFMT_EXT1_CSC_EN(n) (1 << (((n) * 4) + 1))
+#define DISP_REG_OVL_Y2R_PARA_R0(n) (0x0134 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_RMY (GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_G0(n) (0x013c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_GMU (GENMASK(30, 16))
+#define DISP_REG_OVL_Y2R_PARA_B1(n) (0x0148 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_BMV (GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_0(n) (0x014c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_YA (GENMASK(10, 0))
+#define OVL_Y2R_PARA_C_CF_UA (GENMASK(26, 16))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_1(n) (0x0150 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_VA (GENMASK(10, 0))
+#define DISP_REG_OVL_Y2R_PRE_ADD2(n) (0x0154 + 0x28 * (n))
+#define DISP_REG_OVL_R2R_R0(n) (0x0500 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_G1(n) (0x0510 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_B2(n) (0x0520 + 0x40 * (n))
#define DISP_REG_OVL_ADDR_MT8173 0x0f40
#define DISP_REG_OVL_ADDR(ovl, n) ((ovl)->data->addr + 0x20 * (n))
#define DISP_REG_OVL_HDR_ADDR(ovl, n) ((ovl)->data->addr + 0x20 * (n) + 0x04)
@@ -56,6 +74,8 @@
#define OVL_CON_CLRFMT_MAN BIT(23)
#define OVL_CON_BYTE_SWAP BIT(24)
#define OVL_CON_RGB_SWAP BIT(25)
+#define OVL_CON_MTX_AUTO_DIS BIT(26)
+#define OVL_CON_MTX_EN BIT(27)
#define OVL_CON_CLRFMT_RGB (1 << 12)
#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
@@ -63,6 +83,7 @@
#define OVL_CON_CLRFMT_UYVY (4 << 12)
#define OVL_CON_CLRFMT_YUYV (5 << 12)
#define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
+#define OVL_CON_MTX_PROGRAMMABLE (8 << 16)
#define OVL_CON_CLRFMT_RGB565(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
0 : OVL_CON_CLRFMT_RGB)
#define OVL_CON_CLRFMT_RGB888(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
@@ -76,6 +97,22 @@
#define OVL_CON_VIRT_FLIP BIT(9)
#define OVL_CON_HORZ_FLIP BIT(10)

+static inline bool is_10bit_rgb(u32 fmt)
+{
+ switch (fmt) {
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_ARGB2101010:
+ case DRM_FORMAT_RGBX1010102:
+ case DRM_FORMAT_RGBA1010102:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_ABGR2101010:
+ case DRM_FORMAT_BGRX1010102:
+ case DRM_FORMAT_BGRA1010102:
+ return true;
+ }
+ return false;
+}
+
static const u32 mt8173_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
@@ -217,6 +254,14 @@ void mtk_ovl_start(struct device *dev)
if (ovl->data->smi_id_en)
reg |= OVL_LAYER_SMI_ID_EN;

+ /*
+ * When doing Y2R conversion, it's common to get an output
+ * that is larger than 10 bits (negative numbers).
+ * Enable this bit to clamp the output to 10 bits per channel
+ * (should always be enabled)
+ */
+ reg |= OVL_OUTPUT_CLAMP;
+
writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
}
@@ -256,9 +301,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format,
reg = readl(ovl->regs + DISP_REG_OVL_CLRFMT_EXT);
reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK(idx);

- if (format == DRM_FORMAT_RGBA1010102 ||
- format == DRM_FORMAT_BGRA1010102 ||
- format == DRM_FORMAT_ARGB2101010)
+ if (is_10bit_rgb(format))
bit_depth = OVL_CON_CLRFMT_10_BIT;

reg |= OVL_CON_CLRFMT_BIT_DEPTH(bit_depth, idx);
@@ -458,6 +501,78 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
(state->base.fb && !state->base.fb->format->has_alpha))
ignore_pixel_alpha = OVL_CONST_BLEND;

+ /* need to do Y2R and R2R to reduce 10bit data to 8bit for CRC calculation */
+ if (ovl->data->supports_clrfmt_ext) {
+ u32 y2r_coef = 0, y2r_offset = 0, r2r_coef = 0, csc_en = 0;
+
+ if (is_10bit_rgb(fmt)) {
+ con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN | OVL_CON_MTX_PROGRAMMABLE;
+
+ /*
+ * Y2R coef setting
+ * bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^-1,
+ * bit 10 is 2^-2 = 0.25
+ */
+ y2r_coef = BIT(10);
+
+ /* -1 in 10bit */
+ y2r_offset = GENMASK(10, 0) - 1;
+
+ /*
+ * R2R coef setting
+ * bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^-1,
+ * bit 20 is 2^2 = 4
+ */
+ r2r_coef = BIT(20);
+
+ /* CSC_EN is for R2R */
+ csc_en = OVL_CLRFMT_EXT1_CSC_EN(idx);
+
+ /*
+ * 1. YUV input data - 1 and shift right for 2 bits to remove it
+ * [R'] [0.25 0 0] [Y in - 1]
+ * [G'] = [ 0 0.25 0] * [U in - 1]
+ * [B'] [ 0 0 0.25] [V in - 1]
+ *
+ * 2. shift left for 2 bit letting the last 2 bits become 0
+ * [R out] [ 4 0 0] [R']
+ * [G out] = [ 0 4 0] * [G']
+ * [B out] [ 0 0 4] [B']
+ */
+ }
+
+ mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_R0(idx),
+ OVL_Y2R_PARA_C_CF_RMY);
+ mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16),
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_G0(idx),
+ OVL_Y2R_PARA_C_CF_GMU);
+ mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_B1(idx),
+ OVL_Y2R_PARA_C_CF_BMV);
+
+ mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+ OVL_Y2R_PARA_C_CF_YA);
+ mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16),
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+ OVL_Y2R_PARA_C_CF_UA);
+ mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),
+ OVL_Y2R_PARA_C_CF_VA);
+
+ mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_R0(idx));
+ mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_G1(idx));
+ mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_B2(idx));
+
+ mtk_ddp_write_mask(cmdq_pkt, csc_en,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_CLRFMT_EXT1,
+ OVL_CLRFMT_EXT1_CSC_EN(idx));
+ }
+
if (pending->rotation & DRM_MODE_REFLECT_Y) {
con |= OVL_CON_VIRT_FLIP;
addr += (pending->height - 1) * pending->pitch;
--
2.18.0

Next message: Hsiao Chien Sung: "[PATCH v4 10/17] drm/mediatek: Support more color formats in OVL"
Previous message: Hsiao Chien Sung: "[PATCH v4 15/17] drm/mediatek: Add missing plane settings when async update"
In reply to: Hsiao Chien Sung: "[PATCH v4 15/17] drm/mediatek: Add missing plane settings when async update"
Next in thread: Hsiao Chien Sung: "[PATCH v4 10/17] drm/mediatek: Support more color formats in OVL"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]