Re: [PATCH] ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node

[Nicolas Ferre]

On 11/12/2023 at 08:03, Mihai Sain wrote:
> On board the sdmmc0 interface is wired to a SD Card socket.
> According with mmc-controller bindings, the mmc-ddr-3_3v property
> is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
> Remove the mmc-ddr-3_3v property from sdmmc0 node.
>
> Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>

Fine with me:
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

> ---
>   arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> index d0a6dbd377df..f3ffb8f01d8a 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
> @@ -54,7 +54,6 @@ usb2: ehci@500000 {
>   
>   		sdmmc0: sdio-host@a0000000 {
>   			bus-width = <8>;
> -			mmc-ddr-3_3v;
>   			pinctrl-names = "default";
>   			pinctrl-0 = <&pinctrl_sdmmc0_default>;
>   			status = "okay";