Re: [PATCH v8 0/4] RISC-V: Add MMC support for TH1520 boards

[Jisheng Zhang]

On Wed, Dec 06, 2023 at 12:09:20AM -0800, Drew Fustini wrote:
> This series enables the MMC controller in the T-Head TH1520 SoC and
> enables the eMMC and microSD on both the BeagleV Ahead and the Sipeed
> LicheePi 4A.
> 
> The drivers/mmc/host patches from v6 were applied by Ulf and are already
> in the linux-next [1][2] as well as the bindings patch [3]. Thus v7 was
> only a defconfig patch and three device tree patches. This v8 is a
> followup to change the dwcmshc node names to match the documentation.
> 
> Jisheng - can you apply the dts patches to your for-next tree?
> 
> I tested with the riscv defconfig on the Ahead [4] and LPi4a [5]. I only
> tested eMMC and microSD and plan to enable SDIO WiFi in the future.

Thank Drew, for this patch series:

Reviewed-by: Jisheng Zhang <jszhang@xxxxxxxxxx>

I asked Conor's help to take T-HEAD SoC dts patches.
> 
> References:
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=49f23745b064cdb6270402403ef58125d78ba183
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=aff35fbc7830510ef7cbcf8e32a041a55de3dc51
> [3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=af076680db846ed54b00b9a763473d1043446993
> [4] https://gist.github.com/pdp7/881342620ec1509685f23a387e2fc8d7
> [5] https://gist.github.com/pdp7/97017ad88d83fccac18eba69bff817b7
> 
> Changes in PATCH v8:
> - change dwcmshc node labels to match TH1520 System Reference Manual:
>   emmc, sdio0, sdio1
> 
> Changes in PATCH v7:
> //lore.kernel.org/r/20231129-th1520_mmc_dts-v7-0-c77fc19caa6f@xxxxxxxxxxxx
> - fix sorting of DT properties in the mmc nodes
> 
> Changes in PATCH v6:
> https://lore.kernel.org/linux-riscv/20231114-th1520-mmc-v6-0-3273c661a571@xxxxxxxxxxxx/
> - set the mmc nodes to disabled in the th1520.dtsi
> 
> Changes in PATCH v5:
> https://lore.kernel.org/r/20231109-th1520-mmc-v5-0-018bd039cf17@xxxxxxxxxxxx
> - fix logic in th1520_sdhci_set_phy() to correctly check that both
>   MMC_CAP2_NO_SD and MMC_CAP2_NO_SDIO are set in host->mmc->caps2
> - add Acked-by's from Adrian
> 
> Changes in PATCH v4:
> https://lore.kernel.org/linux-riscv/20231101-th1520-mmc-v4-0-86e0216b5994@xxxxxxxxxxxx/
> - set DWCMSHC_CARD_IS_EMMC when (MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO)
>   as checking MMC_CAP_NONREMOVABLE is not sufficient
> - change prefix of phy functions from th1520 to dwcmshc as they are not
>   th1520 specific
> - remove unneeded check of priv in dwcmshc_phy_1_8v_init()
> - remove unneeded check of auto-tuning in th1520_execute_tuning()
> - fix order of new nodes in th1520-beaglev-ahead.dts: move sdhci_clk
>   before uart_sclk, move mmc0 and mmc1 before uart0
> - fix comment typos pointed out by Adrian
> - add trailers that I missed from v2
> 
> Changes in PATCH v3:
> https://lore.kernel.org/r/20231023-th1520-mmc-v3-0-abc5e7491166@xxxxxxxxxxxx
> - always call th1520_sdhci_set_phy() in th1520_set_uhs_signaling()
>   and not only when timing is MMC_TIMING_MMC_HS400. This allows the
>   microSD slot to work as th1520_phy_3_3v_init() is called from
>   th1520_sdhci_set_phy().
> - add mmc1 node for mmc controller connected to the microSD slot
> - add enable mmc1 and add properties for microSD on the Ahead and LPi4A
> 
> Changes in PATCH v2:
> https://lore.kernel.org/r/20231017-th1520-mmc-v2-0-4678c8cc4048@xxxxxxxxxxxx
> - make use of BIT(), GENMASK(), FIELD_PREP(), FIELD_GET()
> - add EXPORT_SYMBOL_GPL(__sdhci_execute_tuning)
> - call th1520_phy_1_8v_init() when FLAG_IO_FIXED_1V8 is set
> - set DWCMSHC_CARD_IS_EMMC when mmc caps contains MMC_CAP_NONREMOVABLE
> - remove manipulation of AT_CTRL_AT_EN from th1520_set_uhs_signaling()
> - remove unneccessary cycle of enabling and disabling AT_CTRL_AT_EN in
>   th1520_execute_tuning()
> - remove th1520_phy_1_8v_init_no_pull()
> - remove th1520_phy_3_3v_init_no_pull()
> - remove FLAG_PULL_UP_EN from priv->flags
> - remove thead,phy-pull-up device tree property
> 
> Changes in PACH v1:
> https://lore.kernel.org/all/20230921-th1520-mmc-v1-0-49f76c274fb3@xxxxxxxxxxxx/
> - ADMA mode now works correctly due to a patch from Jisheng on the list
>   ("riscv: dts: thead: set dma-noncoherent to soc bus") and this commit
>   from Icenowy that is now merged: 8eb8fe67e2c8 ("riscv: errata: fix
>   T-Head dcache.cva encoding").
> - Expose __sdhci_execute_tuning from sdhci.c so that it can be called
>   from th1520_execute_tuning()
> - Refactor the define macros for all the PHY related registers to make
>   it easier to understand the bit fields that the code is manipulating
> - Replace magic numbers in the PHY register writes with proper defines
> - Replace non_removable in dwcmshc_priv with check of mmc_host.caps
> - Drop dt prop "thead,io-fixed-1v8" and instead check for existing
>   properties: "mmc-ddr-1_8v", "mmc-hs200-1_8v", or "mmc-hs400-1_8v"
> - Rename dt prop from "thead,pull-up" to "thead,phy-pull-up" and
>   improve the description in the dt binding
> - Replace pull_up_en in dwcmshc_priv with bit field in new flags field
> - Create th1520_set_uhs_signaling() and call dwcmshc_set_uhs_signaling()
>   from it instead of adding th1520 code to dwcmshc_set_uhs_signaling()
> - Return -EIO instead of -1 upon errors in th1520_execute_tuning()
> 
> Changes in RFC v2:
> https://lore.kernel.org/linux-riscv/20230724-th1520-emmc-v2-0-132ed2e2171e@xxxxxxxxxxxx/
> - Expand dwcmshc_priv based on driver in the T-Head 5.10 kernel:
>   delay_line, non_removable, pull_up_en, io_fixed_1v8
> - New boolean property "thead,pull-up" indicates phy pull-up config
> - New boolean property "thead,io-fixed-1v8" indicates that io voltage
>   should be set to 1.8V during reset
> - Add th1520_phy_1_8v_init() as voltage_switch op
> - Add th1520_execute_tuning() as the platform_execute_tuning op
> - Added th1520_sdhci_reset() as the .reset op. This function will set
>   io voltage to 1.8V after calling the standard sdhci_reset() function.
> - Modified dwcmshc_set_uhs_signaling() to enable SDHCI_CTRL_VDD_180 when
>   io_fixed_1v8 is true
> - Add many defines for register offsets and settings based on the mmc
>   support in the T-Head downstream v5.10 kernel
> 
> RFC v1 series:
> https://lore.kernel.org/r/20230724-th1520-emmc-v1-0-cca1b2533da2@xxxxxxxxxxxx
> 
> Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxx>
> ---
> Drew Fustini (4):
>       riscv: defconfig: Enable mmc and dma drivers for T-Head TH1520
>       riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock
>       riscv: dts: thead: Enable BeagleV Ahead eMMC and microSD
>       riscv: dts: thead: Enable LicheePi 4A eMMC and microSD
> 
>  arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 20 +++++++++++++
>  .../boot/dts/thead/th1520-lichee-module-4a.dtsi    | 20 +++++++++++++
>  arch/riscv/boot/dts/thead/th1520.dtsi              | 34 ++++++++++++++++++++++
>  arch/riscv/configs/defconfig                       |  2 ++
>  4 files changed, 76 insertions(+)
> ---
> base-commit: 1f5c003694fab4b1ba6cbdcc417488b975c088d0
> change-id: 20231129-th1520_mmc_dts-e472bcc70d0d
> 
> Best regards,
> -- 
> Drew Fustini <dfustini@xxxxxxxxxxxx>
>