Re: [PATCH 3/4] regulator: qcom-rpmh: add support for pm8010 regulators

[David Collins]

On 12/10/23 19:17, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
> 
> Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM8010
> PMIC. It has 7 LDOs with 3 different types, LDO1 - LDO2 are L502
> NMOS LDOs, LDO5 and LDO7 are L502 PMOS LDOs, LDO3/LDO4/LDO6 are
> L502 PMOS LDO for low noise applications. Also, LDO3 - LDO7 don't
> support LPM.
> 
> Suggested-by: David Collins <quic_collinsd@xxxxxxxxxxx>
> Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>

Reviewed-by: David Collins <quic_collinsd@xxxxxxxxxxx>


> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index 43b45feb02e6..80e304711345 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -511,6 +511,14 @@ static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
>  	[REGULATOR_MODE_FAST]    = -EINVAL,
>  };
>  
> +static const int pmic_mode_map_pmic5_ldo_hpm[REGULATOR_MODE_STANDBY + 1] = {

Minor: This is fine as-is.  However, it might be a bit better with the
name: "pmic_mode_map_pmic5_ldo_hpm_only".


> +	[REGULATOR_MODE_INVALID] = -EINVAL,
> +	[REGULATOR_MODE_STANDBY] = -EINVAL,
> +	[REGULATOR_MODE_IDLE]    = -EINVAL,
> +	[REGULATOR_MODE_NORMAL]  = PMIC5_LDO_MODE_HPM,
> +	[REGULATOR_MODE_FAST]    = -EINVAL,
> +};
> +
>  static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
>  {
>  	unsigned int mode;
> @@ -733,6 +741,33 @@ static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
>  	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
>  };
>  
> +static const struct rpmh_vreg_hw_data pmic5_pldo502 = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_ops,
> +	.voltage_ranges = (struct linear_range[]) {
> +		REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
> +	},
> +	.n_linear_ranges = 1,
> +	.n_voltages = 256,
> +	.pmic_mode_map = pmic_mode_map_pmic5_ldo_hpm,
> +	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
> +static const struct rpmh_vreg_hw_data pmic5_pldo502ln = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_ops,
> +	.voltage_ranges = (struct linear_range[]) {
> +		REGULATOR_LINEAR_RANGE(1800000, 0,  2,  200000),
> +		REGULATOR_LINEAR_RANGE(2608000, 3,  28, 16000),
> +		REGULATOR_LINEAR_RANGE(3104000, 29, 30, 96000),
> +		REGULATOR_LINEAR_RANGE(3312000, 31, 31, 0),
> +	},
> +	.n_linear_ranges = 4,
> +	.n_voltages = 32,
> +	.pmic_mode_map = pmic_mode_map_pmic5_ldo_hpm,
> +	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
>  static const struct rpmh_vreg_hw_data pmic5_nldo = {
>  	.regulator_type = VRM,
>  	.ops = &rpmh_regulator_vrm_drms_ops,
> @@ -759,6 +794,19 @@ static const struct rpmh_vreg_hw_data pmic5_nldo515 = {
>  	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
>  };
>  
> +static const struct rpmh_vreg_hw_data pmic5_nldo502 = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_drms_ops,
> +	.voltage_ranges = (struct linear_range[]) {
> +		REGULATOR_LINEAR_RANGE(528000, 0, 127, 8000),
> +	},
> +	.n_linear_ranges = 1,
> +	.n_voltages = 128,
> +	.hpm_min_load_uA = 30000,
> +	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
> +	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
>  static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
>  	.regulator_type = VRM,
>  	.ops = &rpmh_regulator_vrm_ops,
> @@ -1210,6 +1258,16 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
>  	{}
>  };
>  
> +static const struct rpmh_vreg_init_data pm8010_vreg_data[] = {
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo502,   "vdd-l1-l2"),
> +	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo502,   "vdd-l1-l2"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_pldo502ln, "vdd-l3-l4"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo502ln, "vdd-l3-l4"),
> +	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo502,   "vdd-l5"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo502ln, "vdd-l6"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo502,   "vdd-l7"),
> +};
> +
>  static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
>  	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
>  	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> @@ -1525,6 +1583,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pm8009-1-rpmh-regulators",
>  		.data = pm8009_1_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pm8010-rpmh-regulators",
> +		.data = pm8010_vreg_data,
> +	},
>  	{
>  		.compatible = "qcom,pm8150-rpmh-regulators",
>  		.data = pm8150_vreg_data,
>