Re: [PATCH net-next v2 3/3] net/ncsi: Add NC-SI 1.2 Get MC MAC Address command

[Ivan Mikhaylov]

Patrick, Peter,

> +static int ncsi_rsp_handler_gmcma(struct ncsi_request *nr)
> +{
> +	struct ncsi_dev_priv *ndp = nr->ndp;
> +	struct net_device *ndev = ndp->ndev.dev;
> +	struct ncsi_rsp_gmcma_pkt *rsp;
> +	struct sockaddr saddr;
> +	int ret = -1;
> +	int i;
> +
> +	rsp = (struct ncsi_rsp_gmcma_pkt *)skb_network_header(nr->rsp);
> +	saddr.sa_family = ndev->type;
> +	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> +
> +	netdev_info(ndev, "NCSI: Received %d provisioned MAC addresses\n",
> +		    rsp->address_count);
> +	for (i = 0; i < rsp->address_count; i++) {
> +		netdev_info(ndev, "NCSI: MAC address %d: %02x:%02x:%02x:%02x:%02x:%02x\n",
> +			    i, rsp->addresses[i][0], rsp->addresses[i][1],
> +			    rsp->addresses[i][2], rsp->addresses[i][3],
> +			    rsp->addresses[i][4], rsp->addresses[i][5]);
> +	}
> +
> +	for (i = 0; i < rsp->address_count; i++) {
> +		memcpy(saddr.sa_data, &rsp->addresses[i], ETH_ALEN);
> +		ret = ndev->netdev_ops->ndo_set_mac_address(ndev, &saddr);
> +		if (ret < 0) {
> +			netdev_warn(ndev, "NCSI: Unable to assign %pM to device\n",
> +				    saddr.sa_data);
> +			continue;
> +		}
> +		netdev_warn(ndev, "NCSI: Set MAC address to %pM\n", saddr.sa_data);
> +		break;
> +	}
> +
> +	ndp->gma_flag = ret == 0;
> +	return ret;
> +}

seems very similar to ncsi_rsp_handler_oem_gma except address_count, why it
shouldn't be part of this call with additional param? What's inside it just
code duplicity of ncsi_rsp_handler_oem_gma.

And as we talked in openbmc mailing list, ndo_set_mac_address do not notify
network layer about mac change and this fixed part already in
ncsi_rsp_handler_oem_gma with 790071347a0a1a89e618eedcd51c687ea783aeb3 .

David, any actions should be needed about fixing it in net-next? Need it to
put patch above with fix or do the revert from net-next and make it right?

Thanks.