[net-next PATCH v4 09/13] net: phy: at803x: move specific at8031 config_intr to dedicated function

From: Christian Marangi
Date: Fri Dec 08 2023 - 09:55:00 EST


Move specific at8031 config_intr bits to dedicated function to make
at803x_config_initr more generic.

This is needed in preparation for PHY driver split as qca8081 share the
same function to setup interrupts.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 862ec08ad86b..83428305281b 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -990,7 +990,6 @@ static int at803x_ack_interrupt(struct phy_device *phydev)

static int at803x_config_intr(struct phy_device *phydev)
{
- struct at803x_priv *priv = phydev->priv;
int err;
int value;

@@ -1007,10 +1006,6 @@ static int at803x_config_intr(struct phy_device *phydev)
value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
value |= AT803X_INTR_ENABLE_LINK_FAIL;
value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
- if (priv->is_fiber) {
- value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
- value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
- }

err = phy_write(phydev, AT803X_INTR_ENABLE, value);
} else {
@@ -1617,6 +1612,29 @@ static int at8031_set_wol(struct phy_device *phydev,
return ret;
}

+static int at8031_config_intr(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+ int err, value = 0;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
+ priv->is_fiber) {
+ /* Clear any pending interrupts */
+ err = at803x_ack_interrupt(phydev);
+ if (err)
+ return err;
+
+ value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
+ value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
+
+ err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
+ if (err)
+ return err;
+ }
+
+ return at803x_config_intr(phydev);
+}
+
static int qca83xx_config_init(struct phy_device *phydev)
{
u8 switch_revision;
@@ -2137,7 +2155,7 @@ static struct phy_driver at803x_driver[] = {
.write_page = at803x_write_page,
.get_features = at803x_get_features,
.read_status = at803x_read_status,
- .config_intr = at803x_config_intr,
+ .config_intr = at8031_config_intr,
.handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
.set_tunable = at803x_set_tunable,
--
2.40.1