Re: [PATCH 04/12] iio: adc: ad9467: fix reset gpio handling

From: David Lechner
Date: Thu Nov 30 2023 - 16:41:19 EST


On Tue, Nov 21, 2023 at 4:17 AM Nuno Sa via B4 Relay
<devnull+nuno.sa.analog.com@xxxxxxxxxx> wrote:
>
> From: Nuno Sa <nuno.sa@xxxxxxxxxx>
>
> The reset gpio was being requested with GPIOD_OUT_LOW which means, not
> asserted. Then it was being asserted but never de-asserted which means
> the devices was left in reset. Fix it by de-asserting the gpio.

It could be helpful to update the devicetree bindings to state the
expected active-high or active-low setting for this gpio so it is
clear which state means asserted.

>
> While at it, moved the handling to it's own function and dropped
> 'reset_gpio' from the 'struct ad9467_state' as we only need it during
> probe. On top of that, refactored things so that we now request the gpio
> asserted (i.e in reset) and then de-assert it.
>
> Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
> Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> ---
> drivers/iio/adc/ad9467.c | 33 ++++++++++++++++++++-------------
> 1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
> index 39eccc28debe..368ea57be117 100644
> --- a/drivers/iio/adc/ad9467.c
> +++ b/drivers/iio/adc/ad9467.c
> @@ -121,7 +121,6 @@ struct ad9467_state {
> unsigned int output_mode;
>
> struct gpio_desc *pwrdown_gpio;
> - struct gpio_desc *reset_gpio;
> };
>
> static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
> @@ -378,6 +377,23 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
> return ad9467_outputmode_set(st->spi, st->output_mode);
> }
>
> +static int ad9467_reset(struct device *dev)
> +{
> + struct gpio_desc *gpio;
> +
> + gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(gpio))
> + return PTR_ERR(gpio);
> + if (!gpio)
> + return 0;

can be done in one test instead of 2:

if (IS_ERR_OR_NULL(gpio))
return PTR_ERR_OR_ZERO(gpio);

> +
> + fsleep(1);
> + gpiod_direction_output(gpio, 0);
> + fsleep(10);

Previous version was 10 milliseconds instead of 10 microseconds. Was
this change intentional? If yes, it should be mentioned it in the
commit message.

> +
> + return 0;
> +}
> +
> static int ad9467_probe(struct spi_device *spi)
> {
> const struct ad9467_chip_info *info;
> @@ -408,18 +424,9 @@ static int ad9467_probe(struct spi_device *spi)
> if (IS_ERR(st->pwrdown_gpio))
> return PTR_ERR(st->pwrdown_gpio);
>
> - st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
> - GPIOD_OUT_LOW);
> - if (IS_ERR(st->reset_gpio))
> - return PTR_ERR(st->reset_gpio);
> -
> - if (st->reset_gpio) {
> - udelay(1);
> - ret = gpiod_direction_output(st->reset_gpio, 1);
> - if (ret)
> - return ret;
> - mdelay(10);
> - }
> + ret = ad9467_reset(&spi->dev);
> + if (ret)
> + return ret;
>
> conv->chip_info = &info->axi_adc_info;
>
>
> --
> 2.42.1
>
>