[PATCH iwl-net] i40e: Fix wrong mask used during DCB config

From: Ivan Vecera
Date: Thu Nov 30 2023 - 14:31:45 EST


Mask used for clearing PRTDCB_RETSTCC register in function
i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used
define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define
I40E_PRTDCB_RETSTCC_ETSTC_MASK.

The PRTDCB_RETSTCC register is used to configure whether ETS
or strict priority is used as TSA in Rx for particular TC.

In practice it means that once the register is set to use ETS
as TSA then it is not possible to switch back to strict priority
without CoreR reset.

Fix the value in the clearing mask.

Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB")
Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
---
drivers/net/ethernet/intel/i40e/i40e_dcb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
index 68602fc375f6..073ffbfcbe8d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
@@ -1576,7 +1576,7 @@ void i40e_dcb_hw_rx_ets_bw_config(struct i40e_hw *hw, u8 *bw_share,
reg = rd32(hw, I40E_PRTDCB_RETSTCC(i));
reg &= ~(I40E_PRTDCB_RETSTCC_BWSHARE_MASK |
I40E_PRTDCB_RETSTCC_UPINTC_MODE_MASK |
- I40E_PRTDCB_RETSTCC_ETSTC_SHIFT);
+ I40E_PRTDCB_RETSTCC_ETSTC_MASK);
reg |= ((u32)bw_share[i] << I40E_PRTDCB_RETSTCC_BWSHARE_SHIFT) &
I40E_PRTDCB_RETSTCC_BWSHARE_MASK;
reg |= ((u32)mode[i] << I40E_PRTDCB_RETSTCC_UPINTC_MODE_SHIFT) &
--
2.41.0