[PATCH v5 4/4] pinctrl: qcom: sm4450: correct incorrect address offset

[Tengfei Fan]

The address offset of 0x100000 is already provided in SM4450 DTSI, so
subtract 0x100000 from the offset which used by ufs and sdc.

Suggested-by: Can Guo <quic_cang@xxxxxxxxxxx>
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-sm4450.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm4450.c b/drivers/pinctrl/qcom/pinctrl-sm4450.c
index 49e2e3a7a9cb..5496f955ed2a 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm4450.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm4450.c
@@ -936,14 +936,14 @@ static const struct msm_pingroup sm4450_groups[] = {
 	[133] = PINGROUP(133, _, phase_flag, _, _, _, _, _, _, _),
 	[134] = PINGROUP(134, tsense_pwm1_out, tsense_pwm2_out, _, _, _, _, _, _, _),
 	[135] = PINGROUP(135, _, phase_flag, _, _, _, _, _, _, _),
-	[136] = UFS_RESET(ufs_reset, 0x197000),
-	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x18c004, 0, 0),
-	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x18c000, 13, 6),
-	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x18c000, 11, 3),
-	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x18c000, 9, 0),
-	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x18f000, 14, 6),
-	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x18f000, 11, 3),
-	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x18f000, 9, 0),
+	[136] = UFS_RESET(ufs_reset, 0x97000),
+	[137] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x8c004, 0, 0),
+	[138] = SDC_QDSD_PINGROUP(sdc1_clk, 0x8c000, 13, 6),
+	[139] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x8c000, 11, 3),
+	[140] = SDC_QDSD_PINGROUP(sdc1_data, 0x8c000, 9, 0),
+	[141] = SDC_QDSD_PINGROUP(sdc2_clk, 0x8f000, 14, 6),
+	[142] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x8f000, 11, 3),
+	[143] = SDC_QDSD_PINGROUP(sdc2_data, 0x8f000, 9, 0),
 };
 
 static const struct msm_gpio_wakeirq_map sm4450_pdc_map[] = {
-- 
2.17.1