[PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected

From: Jose Ignacio Tornos Martinez
Date: Wed Nov 29 2023 - 10:16:29 EST


When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded. Avoid these unnecessary operations
when the device is detached (state is USB_STATE_NOTATTACHED) so as
not to get the error messages.

Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
---
drivers/net/usb/ax88179_178a.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..e78d555dd95e 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1308,16 +1308,18 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
struct ax88179_data *ax179_data = dev->driver_priv;
u16 tmp16;

- /* Configure RX control register => stop operation */
- tmp16 = AX_RX_CTL_STOP;
- ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+ if (dev->udev->state != USB_STATE_NOTATTACHED) {
+ /* Configure RX control register => stop operation */
+ tmp16 = AX_RX_CTL_STOP;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);

- tmp16 = 0;
- ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+ tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);

- /* Power down ethernet PHY */
- tmp16 = 0;
- ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+ /* Power down ethernet PHY */
+ tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+ }

kfree(ax179_data);
}
@@ -1663,11 +1665,13 @@ static int ax88179_stop(struct usbnet *dev)
{
u16 tmp16;

- ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ if (dev->udev->state != USB_STATE_NOTATTACHED) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, &tmp16);
- tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
- ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, &tmp16);
+ }

return 0;
}
--
2.43.0