Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common

[Vikash Garodia]

On 11/24/2023 9:26 PM, Luca Weiss wrote:
> On Fri Nov 24, 2023 at 2:35 PM CET, Vikash Garodia wrote:
>>
>>
>> On 11/24/2023 6:23 PM, Dmitry Baryshkov wrote:
>>> On Fri, 24 Nov 2023 at 14:30, Vikash Garodia <quic_vgarodia@xxxxxxxxxxx> wrote:
>>>>
>>>> On 11/24/2023 5:05 PM, Luca Weiss wrote:
>>>>> On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote:
>>>>>>
>>>>>> On 11/22/2023 7:50 PM, Luca Weiss wrote:
>>>>>>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote:
>>>>>>>>
>>>>>>>> On 10/2/2023 7:50 PM, Luca Weiss wrote:
>>>>>>>>> If the video-firmware node is present, the venus driver assumes we're on
>>>>>>>>> a system that doesn't use TZ for starting venus, like on ChromeOS
>>>>>>>>> devices.
>>>>>>>>>
>>>>>>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus
>>>>>>>>> on a non-ChromeOS devices.
>>>>>>>>>
>>>>>>>>> At the same time also disable the venus node by default in the dtsi,
>>>>>>>>> like it's done on other SoCs.
>>>>>>>>>
>>>>>>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
>>>>>>>>> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
>>>>>>>>> ---
>>>>>>>>>  arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++
>>>>>>>>>  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 6 ++----
>>>>>>>>>  2 files changed, 10 insertions(+), 4 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>>>>>> index 5d462ae14ba1..cd491e46666d 100644
>>>>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>>>>>> @@ -104,6 +104,14 @@ &scm {
>>>>>>>>>   dma-coherent;
>>>>>>>>>  };
>>>>>>>>>
>>>>>>>>> +&venus {
>>>>>>>>> + status = "okay";
>>>>>>>>> +
>>>>>>>>> + video-firmware {
>>>>>>>>> +         iommus = <&apps_smmu 0x21a2 0x0>;
>>>>>>>>> + };
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>>  &watchdog {
>>>>>>>>>   status = "okay";
>>>>>>>>>  };
>>>>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>>>>>> index 66f1eb83cca7..fa53f54d4675 100644
>>>>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>>>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 {
>>>>>>>>>                            <&apps_smmu 0x2184 0x20>;
>>>>>> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the
>>>>>> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am
>>>>>> seeing below crash
>>>>>>
>>>>>> Call trace:
>>>>>> [   47.663593]  qcom_smmu_write_s2cr+0x64/0xa4
>>>>>> [   47.663616]  arm_smmu_attach_dev+0x120/0x284
>>>>>> [   47.663647]  __iommu_attach_device+0x24/0xf8
>>>>>> [   47.676845]  __iommu_device_set_domain+0x70/0xd0
>>>>>> [   47.681632]  __iommu_group_set_domain_internal+0x60/0x1b4
>>>>>> [   47.687218]  iommu_setup_default_domain+0x358/0x418
>>>>>> [   47.692258]  __iommu_probe_device+0x3e4/0x404
>>>>>>
>>>>>> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the
>>>>>> qcm6490-fairphone-fp5 hardware having TZ ?
>>>>>
>>>>> Hi,
>>>>>
>>>>> On FP5 it seems it's no problem to have both SIDs in there, probe and
>>>>> using venus appears to work fine.
>>>>>
>>>>> Are you using different firmware than QCM6490.LA.3.0 on the device where
>>>>> you tested this?
>>>> I was testing this on RB3 board which uses firmware [1].
>>>
>>> There is something wrong here.
>>>
>>> RB3 board uses venus-5.2
>>> RB5 board uses vpu-1.0
>>> Only sc7280 uses vpu-2.0
>>
>> Tested on QCM6490 IDP board, which is QCOM internal board similar to RB3 gen2.
> 
> In any case, I don't know much about the venus & iommu setup here. I can
> try removing the 0x2184 SID and test if venus still works on FP5.

Please remove 0x2184 SID and confirm specifically encoder works. This SID is for
encoder.

> Also should the chromebooks keep that iommu entry or not?
Chrome-common can have 0x2184 since its no-TZ based solution. So in sc7280.dtsi,
you can keep the default SID i.e 0x2180 (with respective mask) and in
chrome-common, we can override the iommus property with 0x2180 and 0x2184.

Regards,
Vikash

> Regards
> Luca
> 
>>
>>>>
>>>> Regards,
>>>> Vikash
>>>>
>>>> [1]
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0
>>>>
>>>>>>
>>>>>>>>>                   memory-region = <&video_mem>;
>>>>>>>>>
>>>>>>>>> +                 status = "disabled";
>>>>>>>>> +
>>>>>>>>>                   video-decoder {
>>>>>>>>>                           compatible = "venus-decoder";
>>>>>>>>>                   };
>>>>>>>>> @@ -3748,10 +3750,6 @@ video-encoder {
>>>>>>>>>                           compatible = "venus-encoder";
>>>>>>>>>                   };
>>>>>>>>>
>>>>>>>>> -                 video-firmware {
>>>>>>>>> -                         iommus = <&apps_smmu 0x21a2 0x0>;
>>>>>>>>> -                 };
>>>>>>>>> -
>>>>>>>>>                   venus_opp_table: opp-table {
>>>>>>>>>                           compatible = "operating-points-v2";
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Changes look good. Is this tested on SC7280 ?
>>>>>>>
>>>>>>> Hi Vikash,
>>>>>>>
>>>>>>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff
>>>>>>> reports no differences except for status = okay property being added, so
>>>>>>> there should be no change on those boards. See below.
>>>>>>>
>>>>>>> Regards
>>>>>>> Luca
>>>>>>
>>>>>> I tested on SC7280 (herobrine) and all good.
>>>>>
>>>>> Great, thanks!
>>>>>
>>>>> Regards
>>>>> Luca
>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Vikash
>>>>>
>>>>
>>>
>>>
>