Re: [PATCH v1 2/2] usb: typec: tcpci: add vconn over current fault handling to maxim_core

From: Heikki Krogerus
Date: Tue Nov 28 2023 - 02:59:29 EST


On Tue, Nov 21, 2023 at 08:38:48PM +0000, RD Babiera wrote:
> Add TCPC_FAULT_STATUS_VCONN_OC constant and corresponding mask definition.
> Maxim TCPC is capable of detecting VConn over current faults, so add
> fault to alert mask. When a Vconn over current fault is triggered, put the
> port in an error recovery state via tcpm_port_error_recovery.
>
> Signed-off-by: RD Babiera <rdbabiera@xxxxxxxxxx>

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
> drivers/usb/typec/tcpm/tcpci_maxim_core.c | 20 +++++++++++++++++++-
> include/linux/usb/tcpci.h | 5 ++++-
> 2 files changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index 9454b12a073c..7fb966fd639b 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -92,11 +92,16 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
> return;
> }
>
> + /* Vconn Over Current Protection */
> + ret = max_tcpci_write8(chip, TCPC_FAULT_STATUS_MASK, TCPC_FAULT_STATUS_MASK_VCONN_OC);
> + if (ret < 0)
> + return;
> +
> alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
> TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
> TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS |
> /* Enable Extended alert for detecting Fast Role Swap Signal */
> - TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS;
> + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS | TCPC_ALERT_FAULT;
>
> ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
> if (ret < 0) {
> @@ -295,6 +300,19 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
> }
> }
>
> + if (status & TCPC_ALERT_FAULT) {
> + ret = max_tcpci_read8(chip, TCPC_FAULT_STATUS, &reg_status);
> + if (ret < 0)
> + return ret;
> +
> + ret = max_tcpci_write8(chip, TCPC_FAULT_STATUS, reg_status);
> + if (ret < 0)
> + return ret;
> +
> + if (reg_status & TCPC_FAULT_STATUS_VCONN_OC)
> + tcpm_port_error_recovery(chip->port);
> + }
> +
> if (status & TCPC_ALERT_EXTND) {
> ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, &reg_status);
> if (ret < 0)
> diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
> index 83376473ac76..467e8045e9f8 100644
> --- a/include/linux/usb/tcpci.h
> +++ b/include/linux/usb/tcpci.h
> @@ -36,7 +36,9 @@
>
> #define TCPC_ALERT_MASK 0x12
> #define TCPC_POWER_STATUS_MASK 0x14
> -#define TCPC_FAULT_STATUS_MASK 0x15
> +
> +#define TCPC_FAULT_STATUS_MASK 0x15
> +#define TCPC_FAULT_STATUS_MASK_VCONN_OC BIT(1)
>
> #define TCPC_EXTENDED_STATUS_MASK 0x16
> #define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0)
> @@ -104,6 +106,7 @@
>
> #define TCPC_FAULT_STATUS 0x1f
> #define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
> +#define TCPC_FAULT_STATUS_VCONN_OC BIT(1)
>
> #define TCPC_ALERT_EXTENDED 0x21
>
> --
> 2.43.0.rc1.413.gea7ed67945-goog

--
heikki