Re: [PATCH v2] mfd: wm831x: Remove redundant forever while loop

[Lee Jones]

On Mon, 20 Nov 2023, Maciej Strozek wrote:

> Current code excutes only once despite the while loop, so remove the
> loop. Also msleep(1) will likely result in a larger sleep, so increase
> its value for clarity while keeping the same behaviour.
> 
> Signed-off-by: Maciej Strozek <mstrozek@xxxxxxxxxxxxxxxxxxxxx>
> ---
> V1 -> V2: removed unused variable 'timeout'
> 
>  drivers/mfd/wm831x-auxadc.c | 48 +++++++++++++++++--------------------
>  1 file changed, 22 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c
> index 65b98f3fbd92..77f8e51a5753 100644
> --- a/drivers/mfd/wm831x-auxadc.c
> +++ b/drivers/mfd/wm831x-auxadc.c
> @@ -152,7 +152,7 @@ static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
>  static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
>  				     enum wm831x_auxadc input)
>  {
> -	int ret, src, timeout;
> +	int ret, src;
> 
>  	mutex_lock(&wm831x->auxadc_lock);
> 
> @@ -179,32 +179,28 @@ static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
>  		goto disable;
>  	}
> 
> -	/* If we're not using interrupts then poll the
> -	 * interrupt status register */
> -	timeout = 5;
> -	while (timeout) {
> -		msleep(1);
> -
> -		ret = wm831x_reg_read(wm831x,
> -				      WM831X_INTERRUPT_STATUS_1);
> -		if (ret < 0) {
> -			dev_err(wm831x->dev,
> -				"ISR 1 read failed: %d\n", ret);
> -			goto disable;
> -		}
> +	/* If we're not using interrupts then read the
> +	 * interrupt status register
> +	 */

Can someone submit a commit to fix this comment.

> +	msleep(20);

New line here please.

> +	ret = wm831x_reg_read(wm831x,
> +				WM831X_INTERRUPT_STATUS_1);

Odd line-up.

> +	if (ret < 0) {
> +		dev_err(wm831x->dev,
> +			"ISR 1 read failed: %d\n", ret);
> +		goto disable;
> +	}
> 
> -		/* Did it complete? */
> -		if (ret & WM831X_AUXADC_DATA_EINT) {
> -			wm831x_reg_write(wm831x,
> -					 WM831X_INTERRUPT_STATUS_1,
> -					 WM831X_AUXADC_DATA_EINT);
> -			break;
> -		} else {
> -			dev_err(wm831x->dev,
> -				"AUXADC conversion timeout\n");
> -			ret = -EBUSY;
> -			goto disable;
> -		}
> +	/* Did it complete? */
> +	if (ret & WM831X_AUXADC_DATA_EINT) {
> +		wm831x_reg_write(wm831x,
> +					WM831X_INTERRUPT_STATUS_1,
> +					WM831X_AUXADC_DATA_EINT);

Very odd line-up.

> +	} else {
> +		dev_err(wm831x->dev,
> +			"AUXADC conversion timeout\n");
> +		ret = -EBUSY;
> +		goto disable;
>  	}
> 
>  	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
> --
> 2.34.1
> 

-- 
Lee Jones [李琼斯]