Re: [PATCH v4] scsi: libsas: Fix the failure of adding phy with zero-address to port

From: John Garry
Date: Thu Nov 23 2023 - 09:52:57 EST


On 17/11/2023 09:00, Xingui Yang wrote:

Sorry for being slow to come back to this. However I still have questions...

When connecting to the epander device, first disable and then enable the

/s/epander/expander/

And connecting what to the expander? Is it a SATA disk?

Or the SATA disk is already attached to the expander and we are now attaching the expander to the host?

It is hard to follow this.

local phy.

So is the local phy disabled initially? Or is was it initially enabled and we disable+re-enable just when attaching, so that there is a race?

The following BUG() will be triggered with a small probability:

[562240.051046] sas: phy19 part of wide port with phy16

Where is this print in the code? I see "part of a wide port with phy%02d" in sas_discover_dev()

[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
[562240.051203] sas: done REVALIDATING DOMAIN on port 0, pid:435909, res 0x0
<...>
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
[562240.085064] ------------[ cut here ]------------
[562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
[562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
[562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 0x0000000003bcbebf)
[562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain [libsas]
[562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
[562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.479751] sp : ffff0000300cfa70
[562240.674822] Call trace:
[562240.682709] sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.694013] sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
[562240.704957] sas_ex_discover_end_dev+0xfc/0x538 [libsas]
[562240.715508] sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
[562240.725634] sas_ex_discover_devices+0x9c/0x1a8 [libsas]
[562240.735855] sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
[562240.746123] sas_revalidate_domain+0x158/0x160 [libsas]
[562240.756014] process_one_work+0x1b4/0x448
[562240.764548] worker_thread+0x54/0x468
[562240.772562] kthread+0x134/0x138
[562240.779989] ret_from_fork+0x10/0x18

What causes this problem:
1. When phy19 was initially added to the parent port, ex_phy->port was not

phy19 is the expander phy attached to the host, right?

set. As a result, when phy19 was removed from the parent wide port,

You seem to be getting ahead of yourself. It has not been mentioned when phy19 is removed from the parent wide port.

it was
not deleted from the phy_list of the parent port.

2. The rate of the newly connected SATA device to phy0 is less than 1.5G,
and its sas_address was set to 0. After creating port 7:7:0

is 7:7:0 the port which the SATA device is part of?

, it attempts to
add the expander's other zero-addressed phy to this port.

3. When adding phy19 to port-7:7:0

Which would be the incorrect thing to do, right? I am basing that on my assumption that 7:7:0 is the port which the SATA device is part of.

, it is prompted that phy19 already
belongs to another port, which triggers the current problem.

Fix the problem as follows:
1. When ex_phy is added to the parent port, set ex_phy->port to
ex_dev->parent_port.

2. Set ex_dev->parent_port to NULL when the parent port's PHY count is 0.

3. When phy->attached_dev_type != NO_DEVICE, do not set the zero address
for phy->attached_sas_addr.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx>
---
v3 -> v4:
1. Update patch title and comments based on John's suggestion.

v2 -> v3:
1. Set ex_dev->parent_port to NULL when the number of PHYs of the parent
port becomes 0
2. Update the comments

v1 -> v2:
1. Set ex_phy->port with parent_port when ex_phy is added to the parent port
2. Set ex_phy to NULL when free expander
3. Update the comments
---
drivers/scsi/libsas/sas_discover.c | 4 +++-
drivers/scsi/libsas/sas_expander.c | 8 +++++---
drivers/scsi/libsas/sas_internal.h | 1 +
3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 8fb7c41c0962..8eb3888a9e57 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -296,8 +296,10 @@ void sas_free_device(struct kref *kref)
dev->phy = NULL;
/* remove the phys and ports, everything else should be gone */
- if (dev_is_expander(dev->dev_type))
+ if (dev_is_expander(dev->dev_type)) {
kfree(dev->ex_dev.ex_phy);
+ dev->ex_dev.ex_phy = NULL;

This is strange, as we free the dev later. Where can dev->ex_dev.ex_phy be checked before dev is freed?

+ }
if (dev_is_sata(dev) && dev->sata_dev.ap) {
ata_sas_tport_delete(dev->sata_dev.ap);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index a2204674b680..89d44a9dc4e3 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -239,8 +239,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
/* help some expanders that fail to zero sas_address in the 'no
* device' case
*/
- if (phy->attached_dev_type == SAS_PHY_UNUSED ||
- phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+ if (phy->attached_dev_type == SAS_PHY_UNUSED)
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
else
memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
@@ -1844,9 +1843,12 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
if (phy->port) {
sas_port_delete_phy(phy->port, phy->phy);
sas_device_set_phy(found, phy->port);
- if (phy->port->num_phys == 0)
+ if (phy->port->num_phys == 0) {
list_add_tail(&phy->port->del_list,
&parent->port->sas_port_del_list);
+ if (ex_dev->parent_port == phy->port)
+ ex_dev->parent_port = NULL;
+ }
phy->port = NULL;
}
}
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 3804aef165ad..e860d5b19880 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -202,6 +202,7 @@ static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
sas_port_mark_backlink(ex->parent_port);
}
sas_port_add_phy(ex->parent_port, ex_phy->phy);
+ ex_phy->port = ex->parent_port;

We already do this in sas_ex_join_wide_port(), right?

I am not saying that what we do now does not have a problem - I am just trying to understand what currently happens

Thanks,
John

}
static inline struct domain_device *sas_alloc_device(void)