[PATCH net-next v3 1/3] dt-bindings: net: qcom,ethqos: add binding doc for fault IRQ for sa8775p

[Suraj Jaiswal]

Add binding doc for fault IRQ. The fault IRQ will be
trigger for ECC,DPP,FSM error.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 7bdb412a0185..e013cb51fb07 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@ properties:
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW fault occurs
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
       - const: eth_lpi
+      - const: safety
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@ examples:
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "safety";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
-- 
2.25.1