RE: [PATCH net-next v11 10/13] net:ethernet:realtek:rtase: Implement ethtool function

From: Justin Lai
Date: Wed Nov 22 2023 - 22:16:46 EST


> On 15.11.2023 14:34, Justin Lai wrote:
> > Implement the ethtool function to support users to obtain network card
> > information, including obtaining various device settings, Report
> > whether physical link is up, Report pause parameters, Set pause
> > parameters, Return a set of strings that describe the requested
> > objects, Get number of strings that @get_strings will write, Return
> > extended statistics about the device.
> >
> > Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
> > ---
> > .../net/ethernet/realtek/rtase/rtase_main.c | 144 ++++++++++++++++++
> > 1 file changed, 144 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > index b7679b74cc8a..5ea4d51fcc47 100644
> > --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > @@ -1900,9 +1900,153 @@ static void rtase_get_mac_address(struct
> net_device *dev)
> > ether_addr_copy(dev->perm_addr, dev->dev_addr); }
> >
> > +static void rtase_get_drvinfo(struct net_device *dev,
> > + struct ethtool_drvinfo *drvinfo) {
> > + const struct rtase_private *tp = netdev_priv(dev);
> > +
> > + strscpy(drvinfo->driver, KBUILD_MODNAME, 32);
> > + strscpy(drvinfo->bus_info, pci_name(tp->pdev), 32); }
> > +
> > +static int rtase_get_settings(struct net_device *dev,
> > + struct ethtool_link_ksettings *cmd) {
> > + u32 supported = SUPPORTED_MII | SUPPORTED_Pause |
> > +SUPPORTED_Asym_Pause;
> > +
> > +
> ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
> > + supported);
> > + cmd->base.speed = SPEED_5000;
> > + cmd->base.duplex = DUPLEX_FULL;
> > + cmd->base.port = PORT_MII;
> > + cmd->base.autoneg = AUTONEG_DISABLE;
> > +
> What are you reporting here? Does this refer to the link between MAC and
> switch CPU port? Because I would assume that the switch ports can do
> autoneg.

PATCH 1/13 has our CHIP architecture. The mac and switch are directly connected, and the line seed is fixed at 5G, so there is no need for autoneg.
>
> > + return 0;
> > +}
> > +
> > +static void rtase_get_pauseparam(struct net_device *dev,
> > + struct ethtool_pauseparam *pause) {
> > + const struct rtase_private *tp = netdev_priv(dev);
> > + u16 value = rtase_r16(tp, RTASE_CPLUS_CMD);
> > +
> > + pause->autoneg = AUTONEG_DISABLE;
> > +
> > + if ((value & (FORCE_TXFLOW_EN | FORCE_RXFLOW_EN)) ==
> > + (FORCE_TXFLOW_EN | FORCE_RXFLOW_EN)) {
> > + pause->rx_pause = 1;
> > + pause->tx_pause = 1;
> > + } else if ((value & FORCE_TXFLOW_EN)) {
> > + pause->tx_pause = 1;
> > + } else if ((value & FORCE_RXFLOW_EN)) {
> > + pause->rx_pause = 1;
> > + }
> > +}
> > +
> > +static int rtase_set_pauseparam(struct net_device *dev,
> > + struct ethtool_pauseparam *pause) {
> > + const struct rtase_private *tp = netdev_priv(dev);
> > + u16 value = rtase_r16(tp, RTASE_CPLUS_CMD);
> > +
> > + if (pause->autoneg)
> > + return -EOPNOTSUPP;
> > +
> > + value &= ~(FORCE_TXFLOW_EN | FORCE_RXFLOW_EN);
> > +
> > + if (pause->tx_pause)
> > + value |= FORCE_TXFLOW_EN;
> > +
> > + if (pause->rx_pause)
> > + value |= FORCE_RXFLOW_EN;
> > +
> > + rtase_w16(tp, RTASE_CPLUS_CMD, value);
> > + return 0;
> > +}
> > +
> > +static const char rtase_gstrings[][ETH_GSTRING_LEN] = {
> > + "tx_packets",
> > + "rx_packets",
> > + "tx_errors",
> > + "rx_errors",
> > + "rx_missed",
> > + "align_errors",
> > + "tx_single_collisions",
> > + "tx_multi_collisions",
> > + "unicast",
> > + "broadcast",
> > + "multicast",
> > + "tx_aborted",
> > + "tx_underrun",
> > +};
> > +
> > +static void rtase_get_strings(struct net_device *dev, u32 stringset,
> > +u8 *data) {
> > + switch (stringset) {
> > + case ETH_SS_STATS:
> > + memcpy(data, *rtase_gstrings, sizeof(rtase_gstrings));
> > + break;
> > + }
> > +}
> > +
> > +static int rtase_get_sset_count(struct net_device *dev, int sset) {
> > + int ret = -EOPNOTSUPP;
> > +
> > + switch (sset) {
> > + case ETH_SS_STATS:
> > + ret = ARRAY_SIZE(rtase_gstrings);
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void rtase_get_ethtool_stats(struct net_device *dev,
> > + struct ethtool_stats *stats, u64
> > +*data) {
> > + struct rtase_private *tp = netdev_priv(dev);
> > + const struct rtase_counters *counters;
> > +
> > + ASSERT_RTNL();
> > +
> > + counters = tp->tally_vaddr;
> > + if (!counters)
> > + return;
> > +
> > + rtase_dump_tally_counter(tp);
> > +
> > + data[0] = le64_to_cpu(counters->tx_packets);
> > + data[1] = le64_to_cpu(counters->rx_packets);
> > + data[2] = le64_to_cpu(counters->tx_errors);
> > + data[3] = le32_to_cpu(counters->rx_errors);
> > + data[4] = le16_to_cpu(counters->rx_missed);
> > + data[5] = le16_to_cpu(counters->align_errors);
> > + data[6] = le32_to_cpu(counters->tx_one_collision);
> > + data[7] = le32_to_cpu(counters->tx_multi_collision);
> > + data[8] = le64_to_cpu(counters->rx_unicast);
> > + data[9] = le64_to_cpu(counters->rx_broadcast);
> > + data[10] = le32_to_cpu(counters->rx_multicast);
> > + data[11] = le16_to_cpu(counters->tx_aborted);
> > + data[12] = le16_to_cpu(counters->tx_underun);
> > +}
> > +
> > +static const struct ethtool_ops rtase_ethtool_ops = {
> > + .get_drvinfo = rtase_get_drvinfo,
> > + .get_link = ethtool_op_get_link,
> > + .get_link_ksettings = rtase_get_settings,
> > + .get_pauseparam = rtase_get_pauseparam,
> > + .set_pauseparam = rtase_set_pauseparam,
> > + .get_strings = rtase_get_strings,
> > + .get_sset_count = rtase_get_sset_count,
> > + .get_ethtool_stats = rtase_get_ethtool_stats,
> > + .get_ts_info = ethtool_op_get_ts_info, };
> > +
> > static void rtase_init_netdev_ops(struct net_device *dev) {
> > dev->netdev_ops = &rtase_netdev_ops;
> > + dev->ethtool_ops = &rtase_ethtool_ops;
> > }
> >
> > static void rtase_reset_interrupt(struct pci_dev *pdev,
>