RE: [PATCH v10 1/8] spi: Add multi-cs memories support in SPI core

From: Mahapatra, Amit Kumar
Date: Wed Nov 22 2023 - 08:22:43 EST




> -----Original Message-----
> From: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
> Sent: Wednesday, November 22, 2023 4:51 PM
> To: Mahapatra, Amit Kumar <amit.kumar-mahapatra@xxxxxxx>;
> broonie@xxxxxxxxxx; tudor.ambarus@xxxxxxxxxx; pratyush@xxxxxxxxxx;
> miquel.raynal@xxxxxxxxxxx; richard@xxxxxx; vigneshr@xxxxxx
> Cc: linux-spi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> michael@xxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> nicolas.ferre@xxxxxxxxxxxxx; alexandre.belloni@xxxxxxxxxxx;
> claudiu.beznea@xxxxxxxxx; Simek, Michal <michal.simek@xxxxxxx>; linux-
> arm-kernel@xxxxxxxxxxxxxxxxxxx; git (AMD-Xilinx) <git@xxxxxxx>;
> amitrkcian2002@xxxxxxxxx; patches@xxxxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v10 1/8] spi: Add multi-cs memories support in SPI core
>
>
> On 21/11/2023 19:18, Mahapatra, Amit Kumar wrote:
> > Hello Stefan,
> >
> >> -----Original Message-----
> >> From: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
> >> Sent: Tuesday, November 21, 2023 11:07 PM
> >> To: Mahapatra, Amit Kumar <amit.kumar-mahapatra@xxxxxxx>;
> >> broonie@xxxxxxxxxx; tudor.ambarus@xxxxxxxxxx; pratyush@xxxxxxxxxx;
> >> miquel.raynal@xxxxxxxxxxx; richard@xxxxxx; vigneshr@xxxxxx
> >> Cc: linux-spi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >> michael@xxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> >> nicolas.ferre@xxxxxxxxxxxxx; alexandre.belloni@xxxxxxxxxxx;
> >> claudiu.beznea@xxxxxxxxx; Simek, Michal <michal.simek@xxxxxxx>;
> >> linux- arm-kernel@xxxxxxxxxxxxxxxxxxx; git (AMD-Xilinx)
> >> <git@xxxxxxx>; amitrkcian2002@xxxxxxxxx;
> >> patches@xxxxxxxxxxxxxxxxxxxxx
> >> Subject: Re: [PATCH v10 1/8] spi: Add multi-cs memories support in
> >> SPI core
> >>
> >>
> >> On 21/11/2023 16:35, Mahapatra, Amit Kumar wrote:
> >>> Hello Stefan,
> >>>
> >>>> -----Original Message-----
> >>>> From: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
> >>>> Sent: Tuesday, November 21, 2023 7:28 PM
> >>>> To: Mahapatra, Amit Kumar <amit.kumar-mahapatra@xxxxxxx>;
> >>>> broonie@xxxxxxxxxx; tudor.ambarus@xxxxxxxxxx; pratyush@xxxxxxxxxx;
> >>>> miquel.raynal@xxxxxxxxxxx; richard@xxxxxx; vigneshr@xxxxxx
> >>>> Cc: linux-spi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >>>> michael@xxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> >>>> nicolas.ferre@xxxxxxxxxxxxx; alexandre.belloni@xxxxxxxxxxx;
> >>>> claudiu.beznea@xxxxxxxxx; Simek, Michal <michal.simek@xxxxxxx>;
> >>>> linux- arm-kernel@xxxxxxxxxxxxxxxxxxx; git (AMD-Xilinx)
> >>>> <git@xxxxxxx>; amitrkcian2002@xxxxxxxxx;
> >>>> patches@xxxxxxxxxxxxxxxxxxxxx
> >>>> Subject: Re: [PATCH v10 1/8] spi: Add multi-cs memories support in
> >>>> SPI core
> >>>>
> >>>>
> >>>> On 21/11/2023 07:39, Mahapatra, Amit Kumar wrote:
> >>>>> Hello Stefan,
> >>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
> >>>>>> Sent: Monday, November 20, 2023 8:00 PM
> >>>>>> To: Mahapatra, Amit Kumar <amit.kumar-mahapatra@xxxxxxx>;
> >>>>>> broonie@xxxxxxxxxx; tudor.ambarus@xxxxxxxxxx;
> >>>>>> pratyush@xxxxxxxxxx; miquel.raynal@xxxxxxxxxxx; richard@xxxxxx;
> >>>>>> vigneshr@xxxxxx
> >>>>>> Cc: linux-spi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >>>>>> michael@xxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> >>>>>> nicolas.ferre@xxxxxxxxxxxxx; alexandre.belloni@xxxxxxxxxxx;
> >>>>>> claudiu.beznea@xxxxxxxxx; Simek, Michal
> <michal.simek@xxxxxxx>;
> >>>>>> linux- arm-kernel@xxxxxxxxxxxxxxxxxxx; git (AMD-Xilinx)
> >>>>>> <git@xxxxxxx>; amitrkcian2002@xxxxxxxxx;
> >>>>>> patches@xxxxxxxxxxxxxxxxxxxxx
> >>>>>> Subject: Re: [PATCH v10 1/8] spi: Add multi-cs memories support
> >>>>>> in SPI core
> >>>>>>
> >>>>>>
> >>>>>> On 18/11/2023 13:54, Amit Kumar Mahapatra wrote:
> >>>>>>> AMD-Xilinx GQSPI controller has two advanced mode that allows
> >>>>>>> the controller to consider two flashes as one single device.
> >>>>>>>
> >>>>>>> One of these two mode is the parallel mode in which each byte of
> >>>>>>> data is stored in both devices, the even bits in the lower flash
> >>>>>>> & the odd bits in the upper flash. The byte split is
> >>>>>>> automatically handled by the QSPI controller.
> >>>>>>>
> >>>>>>> The other mode is the stacked mode in which both the flashes
> >>>>>>> share the same SPI bus but each of the device contain half of the
> data.
> >>>>>>> In this mode, the controller does not follow CS requests but
> >>>>>>> instead internally wires the two CS levels with the value of the
> >>>>>>> most significant
> >>>>>> address bit.
> >>>>>>> For supporting both these modes SPI core need to be updated for
> >>>>>>> providing multiple CS for a single SPI device.
> >>>>>>>
> >>>>>>> For adding multi CS support the SPI device need to be aware of
> >>>>>>> all the CS values. So, the "chip_select" member in the
> >>>>>>> spi_device structure is now an array that holds all the CS values.
> >>>>>>>
> >>>>>>> spi_device structure now has a "cs_index_mask" member. This acts
> >>>>>>> as an index to the chip_select array. If nth bit of
> >>>>>>> spi->cs_index_mask is set then the driver would assert spi-
> >>> chip_select[n].
> >>>>>>> In parallel mode all the chip selects are asserted/de-asserted
> >>>>>>> simultaneously and each byte of data is stored in both devices,
> >>>>>>> the even bits in one, the odd bits in the other. The split is
> >>>>>>> automatically handled by the GQSPI controller. The GQSPI
> >>>>>>> controller supports a maximum of two flashes connected in
> >>>>>>> parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in
> >>>>>>> the spi controller flags, through ctlr->flags the spi core will
> >>>>>>> make sure that the controller is capable of handling multiple chip
> selects at once.
> >>>>>>>
> >>>>>>> For supporting multiple CS via GPIO the cs_gpiod member of the
> >>>>>>> spi_device structure is now an array that holds the gpio
> >>>>>>> descriptor for each chipselect.
> >>>>>>>
> >>>>>>> CS GPIO is not tested due to unavailability of necessary
> >>>>>>> hardware
> >> setup.
> >>>>>>> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-
> >>>> mahapatra@xxxxxxx>
> >>>>>>> ---
> >>>>>>> Hello @Stefen,
> >>>>>>> We restructured the SPI core implementation, for handling
> >>>>>>> arbitrary number of devices connected in parallel(multi-cs) or
> >>>>>>> stacked
> >> mode.
> >>>>>>> We have tested this updated patch on native-cs setup but
> >>>>>>> couldn't test cs-gpio due to unavailability of a proper setup.
> >>>>>>> If possible, could you please retest the cs-gpio use case with
> >>>>>>> this updated patch and provide
> >>>>>> your feedback.
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> I tested this chain on 2 different systems using GPIOs as chip
> >>>>>> selects, and see the same error on both:
> >>>>>> [    2.842045] pxa2xx-spi pxa2xx-spi.6: chipselect 0 already in
> >>>>>> use
> >>>>>>
> >>>>>> Let me know if you need any further testing.
> >>>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Stefan Binding
> >>>>>>
> >>>>>>> ---
> >>>>>>> drivers/spi/spi.c | 192 +++++++++++++++++++++++++++++++---
> ----
> >> --
> >>>>>>> include/linux/spi/spi.h | 51 ++++++++---
> >>>>>>> 2 files changed, 191 insertions(+), 52 deletions(-)
> >>>>>>>
> >>>>>>> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index
> >>>>>>> 8ead7acb99f3..ff66147ba95f 100644
> >>>>>>> --- a/drivers/spi/spi.c
> >>>>>>> +++ b/drivers/spi/spi.c
> >>>>>>> @@ -612,10 +612,21 @@ static int spi_dev_check(struct device
> >>>>>>> *dev, void
> >>>>>> *data)
> >>>>>>> {
> >>>>>>> struct spi_device *spi = to_spi_device(dev);
> >>>>>>> struct spi_device *new_spi = data;
> >>>>>>> -
> >>>>>>> - if (spi->controller == new_spi->controller &&
> >>>>>>> - spi_get_chipselect(spi, 0) == spi_get_chipselect(new_spi, 0))
> >>>>>>> - return -EBUSY;
> >>>>>>> + int idx, nw_idx;
> >>>>>>> + u8 cs, cs_nw;
> >>>>>>> +
> >>>>>>> + if (spi->controller == new_spi->controller) {
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + cs = spi_get_chipselect(spi, idx);
> >>>>>>> + for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX;
> >>>>>> nw_idx++) {
> >>>>>>> + cs_nw = spi_get_chipselect(spi,
> >> nw_idx);
> >>>>> Thank you for dedicating your time to test my patch.
> >>>>> As per my analysis the error is reported from here as we are
> >>>>> supplying the former SPI device structure to retrieve the CS value
> >>>>> for the new SPI devices.
> >>>>> To fix this, could you kindly substitute the above line with
> >>>>>
> >>>>> cs_nw = spi_get_chipselect(new_spi, nw_idx);
> >>>>>
> >>>>> and rerun your tests?
> >>>>> If it works correctly, I will incorporate this fix into my
> >>>>> upcoming series.
> >>>>>
> >>>>> Regards,
> >>>>> Amit
> >> Hi,
> >>
> >> I've attached my log.
> >> I notice that you add a print to of_spi_parse_dt, however since the
> >> laptop I am using is an x86 laptop, it uses ACPI rather than OF, and
> >> I don't think this function isnt even compiled in.
> > That’s correct, I missed it.
> > Upon reviewing the logs, I discovered that in the ACPI flow, I am not
> > initializing the unused CS[] to FF, as I am doing in the OF flow.
> > Consequently, in the ACPI flow, all the unused CS[] are automatically
> > initialized to 0. During the __spi_add_device process, the SPI core
> > faces difficulty distinguishing between a valid CS value of 0 and an
> > unused CS value of 0, leading to a failure in the driver probe.
> >
> > Incorporating the following modifications should resolve this issue.
> > Kindly apply these changes on top of 1/8 and re-run the test.
> >
> > diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index
> > ff66147ba95f..d0301c17d4f8 100644
> > --- a/drivers/spi/spi.c
> > +++ b/drivers/spi/spi.c
> > @@ -619,7 +619,7 @@ static int spi_dev_check(struct device *dev, void
> *data)
> > for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> > cs = spi_get_chipselect(spi, idx);
> > for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
> > - cs_nw = spi_get_chipselect(spi, nw_idx);
> > + cs_nw = spi_get_chipselect(new_spi,
> > + nw_idx);
> > if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) {
> > dev_err(dev, "chipselect %d already in use\n",
> cs_nw);
> > return -EBUSY; @@ -764,6
> > +764,7 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
> > {
> > struct spi_device *proxy;
> > int status;
> > + u8 idx;
> >
> > /*
> > * NOTE: caller did any chip->bus_num checks necessary.
> > @@ -779,6 +780,9 @@ struct spi_device *spi_new_device(struct
> > spi_controller *ctlr,
> >
> > WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
> >
> > + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> > + spi_set_chipselect(proxy, idx, 0xFF);
> > +
> > spi_set_chipselect(proxy, 0, chip->chip_select);
> > proxy->max_speed_hz = chip->max_speed_hz;
> > proxy->mode = chip->mode;
> > @@ -2514,6 +2518,7 @@ struct spi_device
> *spi_new_ancillary_device(struct spi_device *spi,
> > struct spi_controller *ctlr = spi->controller;
> > struct spi_device *ancillary;
> > int rc = 0;
> > + u8 idx;
> >
> > /* Alloc an spi_device */
> > ancillary = spi_alloc_device(ctlr); @@ -2524,6 +2529,9 @@
> > struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
> >
> > strscpy(ancillary->modalias, "dummy",
> > sizeof(ancillary->modalias));
> >
> > + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> > + spi_set_chipselect(ancillary, idx, 0xFF);
> > +
> > /* Use provided chip-select for ancillary device */
> > spi_set_chipselect(ancillary, 0, chip_select);
> >
> > @@ -2732,6 +2740,7 @@ struct spi_device *acpi_spi_device_alloc(struct
> spi_controller *ctlr,
> > struct acpi_spi_lookup lookup = {};
> > struct spi_device *spi;
> > int ret;
> > + u8 idx;
> >
> > if (!ctlr && index == -1)
> > return ERR_PTR(-EINVAL); @@ -2767,6 +2776,9 @@ struct
> > spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
> > return ERR_PTR(-ENOMEM);
> > }
> >
> > + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> > + spi_set_chipselect(spi, idx, 0xFF);
> > +
> > ACPI_COMPANION_SET(&spi->dev, adev);
> > spi->max_speed_hz = lookup.max_speed_hz;
> > spi->mode |= lookup.mode;
> >
> > Regards,
> > Amit
> >
>
> Hi,
>
> I no longer see that error, or any errors printed from SPI, however, all of the
> transactions are now broken.
> Every transaction seems to read back 0x0, on all SPI devices, whether native
> CS or GPIO CS, and I dont see it toggling the CS GPIO anymore.

I believe the issue stems from the fact that in the ACPI patch,
spi->cs_index_mask is not set to 0x01. As a result, in spi_set_cs,
it fails to meet the condition that governs the CS asset code snippet.
In the following code diff, I've included the necessary fix along with
the earlier changes on top of 1/8. I've also included a couple of debug
prints to aid in further debugging in case my analysis is incorrect.
Please apply these changes on top of 1/8 and re-run the test.

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ff66147ba95f..b2e035c3d494 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -619,7 +619,7 @@ static int spi_dev_check(struct device *dev, void *data)
for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
cs = spi_get_chipselect(spi, idx);
for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
- cs_nw = spi_get_chipselect(spi, nw_idx);
+ cs_nw = spi_get_chipselect(new_spi, nw_idx);
if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) {
dev_err(dev, "chipselect %d already in use\n", cs_nw);
return -EBUSY;
@@ -764,6 +764,7 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
{
struct spi_device *proxy;
int status;
+ u8 idx;

/*
* NOTE: caller did any chip->bus_num checks necessary.
@@ -779,6 +780,9 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,

WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));

+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
+ spi_set_chipselect(proxy, idx, 0xFF);
+
spi_set_chipselect(proxy, 0, chip->chip_select);
proxy->max_speed_hz = chip->max_speed_hz;
proxy->mode = chip->mode;
@@ -787,6 +791,7 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
proxy->dev.platform_data = (void *) chip->platform_data;
proxy->controller_data = chip->controller_data;
proxy->controller_state = NULL;
+ proxy->cs_index_mask = 0x01;

if (chip->swnode) {
status = device_add_software_node(&proxy->dev, chip->swnode);
@@ -1024,6 +1029,8 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (!spi->controller->set_cs_timing && !activate)
spi_delay_exec(&spi->cs_hold, NULL);

+ printk("%s() [%d] spi->cs_index_mask == [%d]\n",__func__, __LINE__, spi->cs_index_mask);
+
if (!(spi->mode & SPI_NO_CS)) {
/*
* Historically ACPI has no means of the GPIO polarity and
@@ -1038,6 +1045,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
if (((spi->cs_index_mask >> idx) & 0x01) &&
spi_get_csgpiod(spi, idx)) {
+ printk("%s() [%d] idx == [%d]\n",__func__, __LINE__, idx);
if (has_acpi_companion(&spi->dev))
gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx),
!enable);
@@ -2514,6 +2522,7 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
struct spi_controller *ctlr = spi->controller;
struct spi_device *ancillary;
int rc = 0;
+ u8 idx;

/* Alloc an spi_device */
ancillary = spi_alloc_device(ctlr);
@@ -2524,12 +2533,16 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,

strscpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias));

+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
+ spi_set_chipselect(ancillary, idx, 0xFF);
+
/* Use provided chip-select for ancillary device */
spi_set_chipselect(ancillary, 0, chip_select);

/* Take over SPI mode/speed from SPI main device */
ancillary->max_speed_hz = spi->max_speed_hz;
ancillary->mode = spi->mode;
+ ancillary->cs_index_mask = 0x01;

WARN_ON(!mutex_is_locked(&ctlr->add_lock));

@@ -2732,6 +2745,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
struct acpi_spi_lookup lookup = {};
struct spi_device *spi;
int ret;
+ u8 idx;

if (!ctlr && index == -1)
return ERR_PTR(-EINVAL);
@@ -2767,12 +2781,16 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
return ERR_PTR(-ENOMEM);
}

+ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
+ spi_set_chipselect(spi, idx, 0xFF);
+
ACPI_COMPANION_SET(&spi->dev, adev);
spi->max_speed_hz = lookup.max_speed_hz;
spi->mode |= lookup.mode;
spi->irq = lookup.irq;
spi->bits_per_word = lookup.bits_per_word;
spi_set_chipselect(spi, 0, lookup.chip_select);
+ spi->cs_index_mask = 0x01;

return spi;
}

Regards,
Amit

>
> Thanks,
>
> Stefan
>
> >> Thanks,
> >>
> >> Stefan
> >>
> >>>> Hi,
> >>>>
> >>>> I still see the same error:
> >>>>
> >>>> [    2.748546] pxa2xx-spi pxa2xx-spi.6: chipselect 0 already in use
> >>> Thank you for the quick testing. For further analysis I have
> >>> incorporated additional debug prints on top of 1/8 patch. The
> >>> corresponding diff is shared below. Kindly implement the specified
> >>> changes, rerun your test and share the kernel logs.
> >>>
> >>> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index
> >>> ff66147ba95f..7f59ea81593d 100644
> >>> --- a/drivers/spi/spi.c
> >>> +++ b/drivers/spi/spi.c
> >>> @@ -618,8 +618,10 @@ static int spi_dev_check(struct device *dev,
> >>> void
> >> *data)
> >>> if (spi->controller == new_spi->controller) {
> >>> for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>> cs = spi_get_chipselect(spi, idx);
> >>> + printk("%s() [%d] CS[%d] = [%d]\n",
> >>> + __func__, __LINE__, idx, cs);
> >>> for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
> >>> - cs_nw = spi_get_chipselect(spi, nw_idx);
> >>> + cs_nw = spi_get_chipselect(new_spi, nw_idx);
> >>> + printk("%s() [%d] CS_NEW[%d] =
> >>> + [%d]\n", __func__, __LINE__, nw_idx, cs_nw);
> >>> if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) {
> >>> dev_err(dev, "chipselect
> >>> %d already in use\n",
> >> cs_nw);
> >>> return -EBUSY; @@ -659,8
> >>> +661,10 @@ static int __spi_add_device(struct spi_device *spi)
> >>> */
> >>> for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>> cs = spi_get_chipselect(spi, idx);
> >>> + printk("%s() [%d] CS[%d] = [%d]\n", __func__,
> >>> + __LINE__, idx, cs);
> >>> for (nw_idx = idx + 1; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
> >>> nw_cs = spi_get_chipselect(spi, nw_idx);
> >>> + printk("%s() [%d] CS_NEW[%d] = [%d]\n",
> >>> + __func__, __LINE__, nw_idx, nw_cs);
> >>> if (cs != 0xFF && nw_cs != 0xFF && cs == nw_cs) {
> >>> dev_err(dev, "chipselect %d already in use\n", nw_cs);
> >>> return -EBUSY; @@ -2401,6 +2405,9
> >>> @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device
> *spi,
> >>> for (idx = 0; idx < rc; idx++)
> >>> spi_set_chipselect(spi, idx, cs[idx]);
> >>>
> >>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> >>> + printk("%s() [%d] CS[%d] = [%d]\n", __func__,
> >>> + __LINE__, idx, spi_get_chipselect(spi, idx));
> >>> +
> >>> /* spi->chip_select[i] gives the corresponding physical CS for logical
> CS i
> >>> * logical CS number is represented by setting the ith bit
> >>> in spi- cs_index_mask
> >>> * So, for example, if spi->cs_index_mask = 0x01 then
> >>> logical CS number is 0 and
> >>>
> >>> Regards,
> >>> Amit
> >>>
> >>>> Thanks,
> >>>>
> >>>> Stefan
> >>>>
> >>>>>>> + if (cs != 0xFF && cs_nw != 0xFF && cs
> >> ==
> >>>>>> cs_nw) {
> >>>>>>> + dev_err(dev, "chipselect %d
> >> already in
> >>>>>> use\n", cs_nw);
> >>>>>>> + return -EBUSY;
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> return 0;
> >>>>>>> }
> >>>>>>>
> >>>>>>> @@ -629,13 +640,32 @@ static int __spi_add_device(struct
> >>>>>>> spi_device
> >>>> *spi)
> >>>>>>> {
> >>>>>>> struct spi_controller *ctlr = spi->controller;
> >>>>>>> struct device *dev = ctlr->dev.parent;
> >>>>>>> - int status;
> >>>>>>> + int status, idx, nw_idx;
> >>>>>>> + u8 cs, nw_cs;
> >>>>>>> +
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + /* Chipselects are numbered 0..max; validate. */
> >>>>>>> + cs = spi_get_chipselect(spi, idx);
> >>>>>>> + if (cs != 0xFF && cs >= ctlr->num_chipselect) {
> >>>>>>> + dev_err(dev, "cs%d >= max %d\n",
> >>>>>> spi_get_chipselect(spi, idx),
> >>>>>>> + ctlr->num_chipselect);
> >>>>>>> + return -EINVAL;
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>>
> >>>>>>> - /* Chipselects are numbered 0..max; validate. */
> >>>>>>> - if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) {
> >>>>>>> - dev_err(dev, "cs%d >= max %d\n",
> spi_get_chipselect(spi, 0),
> >>>>>>> - ctlr->num_chipselect);
> >>>>>>> - return -EINVAL;
> >>>>>>> + /*
> >>>>>>> + * Make sure that multiple logical CS doesn't map to the same
> >>>>>> physical CS.
> >>>>>>> + * For example, spi->chip_select[0] != spi->chip_select[1] and
> >> so on.
> >>>>>>> + */
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + cs = spi_get_chipselect(spi, idx);
> >>>>>>> + for (nw_idx = idx + 1; nw_idx < SPI_CS_CNT_MAX;
> >> nw_idx++) {
> >>>>>>> + nw_cs = spi_get_chipselect(spi, nw_idx);
> >>>>>>> + if (cs != 0xFF && nw_cs != 0xFF && cs ==
> >> nw_cs) {
> >>>>>>> + dev_err(dev, "chipselect %d already in
> >> use\n",
> >>>>>> nw_cs);
> >>>>>>> + return -EBUSY;
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> }
> >>>>>>>
> >>>>>>> /* Set the bus ID string */ @@ -647,11 +677,8 @@ static
> >>>>>>> int __spi_add_device(struct spi_device
> >>>> *spi)
> >>>>>>> * its configuration.
> >>>>>>> */
> >>>>>>> status = bus_for_each_dev(&spi_bus_type, NULL, spi,
> >> spi_dev_check);
> >>>>>>> - if (status) {
> >>>>>>> - dev_err(dev, "chipselect %d already in use\n",
> >>>>>>> - spi_get_chipselect(spi, 0));
> >>>>>>> + if (status)
> >>>>>>> return status;
> >>>>>>> - }
> >>>>>>>
> >>>>>>> /* Controller may unregister concurrently */
> >>>>>>> if (IS_ENABLED(CONFIG_SPI_DYNAMIC) && @@ -659,8
> >> +686,15 @@
> >>>>>> static
> >>>>>>> int __spi_add_device(struct spi_device *spi)
> >>>>>>> return -ENODEV;
> >>>>>>> }
> >>>>>>>
> >>>>>>> - if (ctlr->cs_gpiods)
> >>>>>>> - spi_set_csgpiod(spi, 0, ctlr-
> >cs_gpiods[spi_get_chipselect(spi,
> >>>>>> 0)]);
> >>>>>>> + if (ctlr->cs_gpiods) {
> >>>>>>> + u8 cs;
> >>>>>>> +
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + cs = spi_get_chipselect(spi, idx);
> >>>>>>> + if (cs != 0xFF)
> >>>>>>> + spi_set_csgpiod(spi, idx, ctlr-
> >>> cs_gpiods[cs]);
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>>
> >>>>>>> /*
> >>>>>>> * Drivers may modify this initial i/o setup, but will @@
> >>>>>>> -701,6
> >>>>>>> +735,9 @@ int spi_add_device(struct spi_device *spi)
> >>>>>>> struct spi_controller *ctlr = spi->controller;
> >>>>>>> int status;
> >>>>>>>
> >>>>>>> + /* Set the bus ID string */
> >>>>>>> + spi_dev_set_name(spi);
> >>>>>>> +
> >>>>>>> mutex_lock(&ctlr->add_lock);
> >>>>>>> status = __spi_add_device(spi);
> >>>>>>> mutex_unlock(&ctlr->add_lock); @@ -942,32 +979,51 @@
> >> static
> >>>>>>> void spi_res_release(struct spi_controller
> >>>>>> *ctlr, struct spi_message *mes
> >>>>>>> }
> >>>>>>>
> >>>>>>>
> >>>>>>> /*--------------------------------------------------------------
> >>>>>>> --
> >>>>>>> --
> >>>>>>> --
> >>>>>>> -----*/
> >>>>>>> +static inline bool spi_is_last_cs(struct spi_device *spi) {
> >>>>>>> + u8 idx;
> >>>>>>> + bool last = false;
> >>>>>>> +
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + if ((spi->cs_index_mask >> idx) & 0x01) {
> >>>>>>> + if (spi->controller->last_cs[idx] ==
> >>>>>> spi_get_chipselect(spi, idx))
> >>>>>>> + last = true;
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> + return last;
> >>>>>>> +}
> >>>>>>> +
> >>>>>>>
> >>>>>>> static void spi_set_cs(struct spi_device *spi, bool enable, bool
> force)
> >>>>>>> {
> >>>>>>> bool activate = enable;
> >>>>>>> + u8 idx;
> >>>>>>>
> >>>>>>> /*
> >>>>>>> * Avoid calling into the driver (or doing delays) if the
> >>>>>>> chip
> >> select
> >>>>>>> * isn't actually changing from the last time this was called.
> >>>>>>> */
> >>>>>>> - if (!force && ((enable && spi->controller->last_cs ==
> >>>>>> spi_get_chipselect(spi, 0)) ||
> >>>>>>> - (!enable && spi->controller->last_cs !=
> >>>>>> spi_get_chipselect(spi, 0))) &&
> >>>>>>> + if (!force && ((enable && spi->controller->last_cs_index_mask
> >> ==
> >>>>>>> +spi-
> >>>>>>> cs_index_mask &&
> >>>>>>> + spi_is_last_cs(spi)) ||
> >>>>>>> + (!enable && spi->controller->last_cs_index_mask
> >> == spi-
> >>>>>>> cs_index_mask &&
> >>>>>>> + !spi_is_last_cs(spi))) &&
> >>>>>>> (spi->controller->last_cs_mode_high == (spi->mode &
> >>>>>> SPI_CS_HIGH)))
> >>>>>>> return;
> >>>>>>>
> >>>>>>> trace_spi_set_cs(spi, activate);
> >>>>>>>
> >>>>>>> - spi->controller->last_cs = enable ? spi_get_chipselect(spi, 0) : -
> 1;
> >>>>>>> + spi->controller->last_cs_index_mask = spi->cs_index_mask;
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> >>>>>>> + spi->controller->last_cs[idx] = enable ?
> >>>>>>> +spi_get_chipselect(spi,
> >>>>>> 0)
> >>>>>>> +: -1;
> >>>>>>> spi->controller->last_cs_mode_high = spi->mode &
> >> SPI_CS_HIGH;
> >>>>>>> - if ((spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing)
> &&
> >>>>>> !activate)
> >>>>>>> - spi_delay_exec(&spi->cs_hold, NULL);
> >>>>>>> -
> >>>>>>> if (spi->mode & SPI_CS_HIGH)
> >>>>>>> enable = !enable;
> >>>>>>>
> >>>>>>> - if (spi_get_csgpiod(spi, 0)) {
> >>>>>>> + if (spi_is_csgpiod(spi)) {
> >>>>>>> + if (!spi->controller->set_cs_timing && !activate)
> >>>>>>> + spi_delay_exec(&spi->cs_hold, NULL);
> >>>>>>> +
> >>>>>>> if (!(spi->mode & SPI_NO_CS)) {
> >>>>>>> /*
> >>>>>>> * Historically ACPI has no means of the GPIO
> >> polarity
> >>>>>> and @@
> >>>>>>> -979,26 +1035,38 @@ static void spi_set_cs(struct spi_device
> >>>>>>> *spi, bool
> >>>>>> enable, bool force)
> >>>>>>> * ambiguity. That's why we use enable, that
> >> takes
> >>>>>> SPI_CS_HIGH
> >>>>>>> * into account.
> >>>>>>> */
> >>>>>>> - if (has_acpi_companion(&spi->dev))
> >>>>>>> -
> >>>>>> gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), !enable);
> >>>>>>> - else
> >>>>>>> - /* Polarity handled by GPIO library */
> >>>>>>> -
> >>>>>> gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate);
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + if (((spi->cs_index_mask >> idx) &
> >> 0x01) &&
> >>>>>>> + spi_get_csgpiod(spi, idx)) {
> >>>>>>> + if (has_acpi_companion(&spi-
> >>> dev))
> >>>>>>> +
> >>>>>> gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx),
> >>>>>>> +
> >>>>>> !enable);
> >>>>>>> + else
> >>>>>>> + /* Polarity handled by
> >> GPIO
> >>>>>> library */
> >>>>>>> +
> >>>>>> gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx),
> >>>>>>> +
> >>>>>> activate);
> >>>>>>> +
> >>>>>>> + if (activate)
> >>>>>>> + spi_delay_exec(&spi-
> >>>>>>> cs_setup, NULL);
> >>>>>>> + else
> >>>>>>> + spi_delay_exec(&spi-
> >>>>>>> cs_inactive, NULL);
> >>>>>>> + }
> >>>>>>> + }
> >>>>>>> }
> >>>>>>> /* Some SPI masters need both GPIO CS &
> >> slave_select */
> >>>>>>> if ((spi->controller->flags &
> >> SPI_CONTROLLER_GPIO_SS) &&
> >>>>>>> spi->controller->set_cs)
> >>>>>>> spi->controller->set_cs(spi, !enable);
> >>>>>>> +
> >>>>>>> + if (!spi->controller->set_cs_timing) {
> >>>>>>> + if (activate)
> >>>>>>> + spi_delay_exec(&spi->cs_setup,
> >> NULL);
> >>>>>>> + else
> >>>>>>> + spi_delay_exec(&spi->cs_inactive,
> >> NULL);
> >>>>>>> + }
> >>>>>>> } else if (spi->controller->set_cs) {
> >>>>>>> spi->controller->set_cs(spi, !enable);
> >>>>>>> }
> >>>>>>> -
> >>>>>>> - if (spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) {
> >>>>>>> - if (activate)
> >>>>>>> - spi_delay_exec(&spi->cs_setup, NULL);
> >>>>>>> - else
> >>>>>>> - spi_delay_exec(&spi->cs_inactive, NULL);
> >>>>>>> - }
> >>>>>>> }
> >>>>>>>
> >>>>>>> #ifdef CONFIG_HAS_DMA
> >>>>>>> @@ -2222,8 +2290,8 @@ static void
> >>>>>>> of_spi_parse_dt_cs_delay(struct
> >>>>>> device_node *nc,
> >>>>>>> static int of_spi_parse_dt(struct spi_controller *ctlr,
> >>>>>>> struct spi_device
> >>>> *spi,
> >>>>>>> struct device_node *nc)
> >>>>>>> {
> >>>>>>> - u32 value;
> >>>>>>> - int rc;
> >>>>>>> + u32 value, cs[SPI_CS_CNT_MAX];
> >>>>>>> + int rc, idx;
> >>>>>>>
> >>>>>>> /* Mode (clock phase/polarity/etc.) */
> >>>>>>> if (of_property_read_bool(nc, "spi-cpha")) @@ -2295,14
> >>>>>>> +2363,52
> >>>>>> @@
> >>>>>>> static int of_spi_parse_dt(struct spi_controller *ctlr, struct
> >>>>>>> spi_device
> >> *spi,
> >>>>>>> return 0;
> >>>>>>> }
> >>>>>>>
> >>>>>>> + if (ctlr->num_chipselect > SPI_CS_CNT_MAX) {
> >>>>>>> + dev_err(&ctlr->dev, "No. of CS is more than max. no.
> >> of
> >>>>>> supported CS\n");
> >>>>>>> + return -EINVAL;
> >>>>>>> + }
> >>>>>>> +
> >>>>>>> + /*
> >>>>>>> + * Zero(0) is a valid physical CS value and can be located at
> >> any
> >>>>>>> + * logical CS in the spi->chip_select[]. If all the physical CS
> >>>>>>> + * are initialized to 0 then It would be difficult to differentiate
> >>>>>>> + * between a valid physical CS 0 & an unused logical CS whose
> >>>>>> physical
> >>>>>>> + * CS can be 0. As a solution to this issue initialize all the
> >>>>>>> +CS to
> >> 0xFF.
> >>>>>>> + * Now all the unused logical CS will have 0xFF physical CS
> >>>>>>> +value & can
> >>>>>> be
> >>>>>>> + * ignore while performing physical CS validity checks.
> >>>>>>> + */
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> >>>>>>> + spi_set_chipselect(spi, idx, 0xFF);
> >>>>>>> +
> >>>>>>> /* Device address */
> >>>>>>> - rc = of_property_read_u32(nc, "reg", &value);
> >>>>>>> - if (rc) {
> >>>>>>> + rc = of_property_read_variable_u32_array(nc, "reg", &cs[0],
> >> 1,
> >>>>>>> + SPI_CS_CNT_MAX);
> >>>>>>> + if (rc < 0) {
> >>>>>>> dev_err(&ctlr->dev, "%pOF has no valid 'reg' property
> >>>>>> (%d)\n",
> >>>>>>> nc, rc);
> >>>>>>> return rc;
> >>>>>>> }
> >>>>>>> - spi_set_chipselect(spi, 0, value);
> >>>>>>> + if (rc > ctlr->num_chipselect) {
> >>>>>>> + dev_err(&ctlr->dev, "%pOF has number of CS > ctlr-
> >>>>>>> num_chipselect (%d)\n",
> >>>>>>> + nc, rc);
> >>>>>>> + return rc;
> >>>>>>> + }
> >>>>>>> + if ((of_property_read_bool(nc, "parallel-memories")) &&
> >>>>>>> + (!(ctlr->flags & SPI_CONTROLLER_MULTI_CS))) {
> >>>>>>> + dev_err(&ctlr->dev, "SPI controller doesn't support
> >> multi
> >>>>>> CS\n");
> >>>>>>> + return -EINVAL;
> >>>>>>> + }
> >>>>>>> + for (idx = 0; idx < rc; idx++)
> >>>>>>> + spi_set_chipselect(spi, idx, cs[idx]);
> >>>>>>> +
> >>>>>>> + /* spi->chip_select[i] gives the corresponding physical CS for
> >>>>>>> +logical CS
> >>>>>> i
> >>>>>>> + * logical CS number is represented by setting the ith bit in
> >>>>>>> +spi-
> >>>>>>> cs_index_mask
> >>>>>>> + * So, for example, if spi->cs_index_mask = 0x01 then logical
> >> CS
> >>>>>> number is 0 and
> >>>>>>> + * spi->chip_select[0] will give the physical CS.
> >>>>>>> + * By default spi->chip_select[0] will hold the physical CS
> >>>>>>> +number so,
> >>>>>> set
> >>>>>>> + * spi->cs_index_mask as 0x01.
> >>>>>>> + */
> >>>>>>> + spi->cs_index_mask = 0x01;
> >>>>>>>
> >>>>>>> /* Device speed */
> >>>>>>> if (!of_property_read_u32(nc, "spi-max-frequency",
> >>>>>>> &value)) @@
> >>>>>>> -3100,6 +3206,7 @@ int spi_register_controller(struct
> >>>>>>> spi_controller
> >> *ctlr)
> >>>>>>> struct boardinfo *bi;
> >>>>>>> int first_dynamic;
> >>>>>>> int status;
> >>>>>>> + int idx;
> >>>>>>>
> >>>>>>> if (!dev)
> >>>>>>> return -ENODEV;
> >>>>>>> @@ -3164,7 +3271,8 @@ int spi_register_controller(struct
> >>>>>>> spi_controller
> >>>>>> *ctlr)
> >>>>>>> }
> >>>>>>>
> >>>>>>> /* Setting last_cs to -1 means no chip selected */
> >>>>>>> - ctlr->last_cs = -1;
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
> >>>>>>> + ctlr->last_cs[idx] = -1;
> >>>>>>>
> >>>>>>> status = device_add(&ctlr->dev);
> >>>>>>> if (status < 0)
> >>>>>>> @@ -3889,7 +3997,7 @@ static int __spi_validate(struct
> >>>>>>> spi_device *spi,
> >>>>>> struct spi_message *message)
> >>>>>>> * cs_change is set for each transfer.
> >>>>>>> */
> >>>>>>> if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits &
> >>>>>> SPI_CS_WORD) ||
> >>>>>>> - spi_get_csgpiod(spi, 0))) {
> >>>>>>> + spi_is_csgpiod(spi))) {
> >>>>>>> size_t maxsize = BITS_TO_BYTES(spi->bits_per_word);
> >>>>>>> int ret;
> >>>>>>>
> >>>>>>> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> >>>>>>> index 7b4baff63c5c..871d3a6d879b 100644
> >>>>>>> --- a/include/linux/spi/spi.h
> >>>>>>> +++ b/include/linux/spi/spi.h
> >>>>>>> @@ -20,6 +20,9 @@
> >>>>>>>
> >>>>>>> #include <uapi/linux/spi/spi.h>
> >>>>>>>
> >>>>>>> +/* Max no. of CS supported per spi device */ #define
> >>>>>>> +SPI_CS_CNT_MAX
> >>>>>>> +4
> >>>>>>> +
> >>>>>>> struct dma_chan;
> >>>>>>> struct software_node;
> >>>>>>> struct ptp_system_timestamp; @@ -132,7 +135,8 @@ extern
> >>>>>>> void
> >>>>>> spi_transfer_cs_change_delay_exec(struct spi_message *msg,
> >>>>>>> * @max_speed_hz: Maximum clock rate to be used with this chip
> >>>>>>> * (on this board); may be changed by the device's driver.
> >>>>>>> * The spi_transfer.speed_hz can override this for each transfer.
> >>>>>>> - * @chip_select: Chipselect, distinguishing chips handled by
> >> @controller.
> >>>>>>> + * @chip_select: Array of physical chipselect, spi->chipselect[i] gives
> >>>>>>> + * the corresponding physical CS for logical CS i.
> >>>>>>> * @mode: The spi mode defines how data is clocked out and in.
> >>>>>>> * This may be changed by the device's driver.
> >>>>>>> * The "active low" default for chipselect mode can be
> >> overridden
> >>>>>>> @@ -157,8 +161,8 @@ extern void
> >>>>>> spi_transfer_cs_change_delay_exec(struct spi_message *msg,
> >>>>>>> * the device will bind to the named driver and only the named
> >> driver.
> >>>>>>> * Do not set directly, because core frees it; use
> >> driver_set_override() to
> >>>>>>> * set or clear it.
> >>>>>>> - * @cs_gpiod: GPIO descriptor of the chipselect line (optional,
> >>>>>>> NULL
> >>>> when
> >>>>>>> - * not using a GPIO line)
> >>>>>>> + * @cs_gpiod: Array of GPIO descriptors of the corresponding
> >>>>>>> + chipselect
> >>>>>> lines
> >>>>>>> + * (optional, NULL when not using a GPIO line)
> >>>>>>> * @word_delay: delay to be inserted between consecutive
> >>>>>>> * words of a transfer
> >>>>>>> * @cs_setup: delay to be introduced by the controller
> >>>>>>> after CS is asserted @@ -167,6 +171,7 @@ extern void
> >>>>>> spi_transfer_cs_change_delay_exec(struct spi_message *msg,
> >>>>>>> * deasserted. If @cs_change_delay is used from @spi_transfer,
> >> then
> >>>>>> the
> >>>>>>> * two delays will be added up.
> >>>>>>> * @pcpu_statistics: statistics for the spi_device
> >>>>>>> + * @cs_index_mask: Bit mask of the active chipselect(s) in the
> >>>>>>> + chipselect array
> >>>>>>> *
> >>>>>>> * A @spi_device is used to interchange data between an SPI slave
> >>>>>>> * (usually a discrete chip) and CPU memory.
> >>>>>>> @@ -182,7 +187,7 @@ struct spi_device {
> >>>>>>> struct spi_controller *controller;
> >>>>>>> struct spi_controller *master; /* Compatibility layer
> >> */
> >>>>>>> u32 max_speed_hz;
> >>>>>>> - u8 chip_select;
> >>>>>>> + u8 chip_select[SPI_CS_CNT_MAX];
> >>>>>>> u8 bits_per_word;
> >>>>>>> bool rt;
> >>>>>>> #define SPI_NO_TX BIT(31) /* No transmit wire */
> >>>>>>> @@ -213,7 +218,7 @@ struct spi_device {
> >>>>>>> void *controller_data;
> >>>>>>> char modalias[SPI_NAME_SIZE];
> >>>>>>> const char *driver_override;
> >>>>>>> - struct gpio_desc *cs_gpiod; /* Chip select GPIO
> descriptor
> >>>>>> */
> >>>>>>> + struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /*
> >> Chip select
> >>>>>> gpio desc */
> >>>>>>> struct spi_delay word_delay; /* Inter-word delay */
> >>>>>>> /* CS delays */
> >>>>>>> struct spi_delay cs_setup;
> >>>>>>> @@ -223,6 +228,13 @@ struct spi_device {
> >>>>>>> /* The statistics */
> >>>>>>> struct spi_statistics __percpu *pcpu_statistics;
> >>>>>>>
> >>>>>>> + /* Bit mask of the chipselect(s) that the driver need to use
> >> from
> >>>>>>> + * the chipselect array.When the controller is capable to
> >> handle
> >>>>>>> + * multiple chip selects & memories are connected in parallel
> >>>>>>> + * then more than one bit need to be set in cs_index_mask.
> >>>>>>> + */
> >>>>>>> + u32 cs_index_mask : SPI_CS_CNT_MAX;
> >>>>>>> +
> >>>>>>> /*
> >>>>>>> * Likely need more hooks for more protocol options
> >>>>>>> affecting
> >> how
> >>>>>>> * the controller talks to each chip, like:
> >>>>>>> @@ -279,22 +291,33 @@ static inline void *spi_get_drvdata(const
> >>>>>>> struct spi_device *spi)
> >>>>>>>
> >>>>>>> static inline u8 spi_get_chipselect(const struct spi_device *spi, u8
> idx)
> >>>>>>> {
> >>>>>>> - return spi->chip_select;
> >>>>>>> + return spi->chip_select[idx];
> >>>>>>> }
> >>>>>>>
> >>>>>>> static inline void spi_set_chipselect(struct spi_device
> >>>>>>> *spi,
> >>>>>>> u8 idx, u8
> >>>>>> chipselect)
> >>>>>>> {
> >>>>>>> - spi->chip_select = chipselect;
> >>>>>>> + spi->chip_select[idx] = chipselect;
> >>>>>>> }
> >>>>>>>
> >>>>>>> static inline struct gpio_desc *spi_get_csgpiod(const
> >>>>>>> struct spi_device *spi,
> >>>>>> u8 idx)
> >>>>>>> {
> >>>>>>> - return spi->cs_gpiod;
> >>>>>>> + return spi->cs_gpiod[idx];
> >>>>>>> }
> >>>>>>>
> >>>>>>> static inline void spi_set_csgpiod(struct spi_device *spi,
> >>>>>>> u8 idx, struct
> >>>>>> gpio_desc *csgpiod)
> >>>>>>> {
> >>>>>>> - spi->cs_gpiod = csgpiod;
> >>>>>>> + spi->cs_gpiod[idx] = csgpiod;
> >>>>>>> +}
> >>>>>>> +
> >>>>>>> +static inline bool spi_is_csgpiod(struct spi_device *spi) {
> >>>>>>> + u8 idx;
> >>>>>>> +
> >>>>>>> + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
> >>>>>>> + if (spi_get_csgpiod(spi, idx))
> >>>>>>> + return true;
> >>>>>>> + }
> >>>>>>> + return false;
> >>>>>>> }
> >>>>>>>
> >>>>>>> /**
> >>>>>>> @@ -399,6 +422,8 @@ extern struct spi_device
> >>>>>> *spi_new_ancillary_device(struct spi_device *spi, u8 ch
> >>>>>>> * @bus_lock_spinlock: spinlock for SPI bus locking
> >>>>>>> * @bus_lock_mutex: mutex for exclusion of multiple callers
> >>>>>>> * @bus_lock_flag: indicates that the SPI bus is locked for
> >>>>>>> exclusive use
> >>>>>>> + * @multi_cs_cap: indicates that the SPI Controller can
> >>>>>>> + assert/de-
> >> assert
> >>>>>>> + * more than one chip select at once.
> >>>>>>> * @setup: updates the device mode and clocking records used by
> a
> >>>>>>> * device's SPI controller; protocol code may call this. This
> >>>>>>> * must fail if an unrecognized or unsupported mode is
> >> requested.
> >>>>>>> @@ -567,6 +592,11 @@ struct spi_controller {
> >>>>>>> #define SPI_CONTROLLER_MUST_TX BIT(4) /*
> Requires tx
> >>>> */
> >>>>>>> #define SPI_CONTROLLER_GPIO_SS BIT(5) /* GPIO CS
> >>>> must
> >>>>>> select slave */
> >>>>>>> #define SPI_CONTROLLER_SUSPENDED BIT(6) /* Currently
> >>>>>> suspended */
> >>>>>>> + /*
> >>>>>>> + * The spi-controller has multi chip select capability and can
> >>>>>>> + * assert/de-assert more than one chip select at once.
> >>>>>>> + */
> >>>>>>> +#define SPI_CONTROLLER_MULTI_CS BIT(7)
> >>>>>>>
> >>>>>>> /* Flag indicating if the allocation of this struct is
> >>>>>>> devres-
> >> managed */
> >>>>>>> bool devm_allocated;
> >>>>>>> @@ -677,7 +707,8 @@ struct spi_controller {
> >>>>>>> bool rt;
> >>>>>>> bool auto_runtime_pm;
> >>>>>>> bool cur_msg_mapped;
> >>>>>>> - char last_cs;
> >>>>>>> + char last_cs[SPI_CS_CNT_MAX];
> >>>>>>> + char last_cs_index_mask;
> >>>>>>> bool last_cs_mode_high;
> >>>>>>> bool fallback;
> >>>>>>> struct completion xfer_completion;