Re: [PATCH v3 2/3] media: uvcvideo: Do not halt the device after disconnect

[Sakari Ailus]

Hi Ricardo,

Thank you for the patch.

On Tue, Nov 21, 2023 at 07:53:49PM +0000, Ricardo Ribalda wrote:
> usb drivers should not call to any usb_() function after the
> .disconnect() callback has been triggered.
> 
> If the camera is streaming, the uvc driver will call usb_set_interface or
> usb_clear_halt once the device is being released. Let's fix this issue.
> 
> This is probably not the only driver affected with this kind of bug, but
> until there is a better way to do it in the core this is the way to
> solve this issue.
> 
> When/if a different mechanism is implemented in the core to solve the
> lifetime of devices we will adopt it in uvc.
> 
> Trace:
> [ 1065.389723] drivers/media/usb/uvc/uvc_driver.c:2248 uvc_disconnect enter
> [ 1065.390160] drivers/media/usb/uvc/uvc_driver.c:2264 uvc_disconnect exit
> [ 1065.433956] drivers/media/usb/uvc/uvc_v4l2.c:659 uvc_v4l2_release enter
> [ 1065.433973] drivers/media/usb/uvc/uvc_video.c:2274 uvc_video_stop_streaming enter
> [ 1065.434560] drivers/media/usb/uvc/uvc_video.c:2285 uvc_video_stop_streaming exit
> [ 1065.435154] drivers/media/usb/uvc/uvc_v4l2.c:680 uvc_v4l2_release exit
> [ 1065.435188] drivers/media/usb/uvc/uvc_driver.c:2248 uvc_disconnect enter
> 
> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> ---
>  drivers/media/usb/uvc/uvc_driver.c |  2 ++
>  drivers/media/usb/uvc/uvc_video.c  | 45 ++++++++++++++++++++++++--------------
>  drivers/media/usb/uvc/uvcvideo.h   |  2 ++
>  3 files changed, 32 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index 08fcd2ffa727..413c32867617 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -2257,6 +2257,8 @@ static void uvc_disconnect(struct usb_interface *intf)
>  		return;
>  
>  	uvc_unregister_video(dev);
> +	/* Barrier needed to synchronize with uvc_video_stop_streaming(). */
> +	smp_store_release(&dev->disconnected, true);
>  	kref_put(&dev->ref, uvc_delete);
>  }
>  
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index 28dde08ec6c5..032b44e45b22 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -2243,28 +2243,39 @@ int uvc_video_start_streaming(struct uvc_streaming *stream)
>  	return ret;
>  }
>  
> -void uvc_video_stop_streaming(struct uvc_streaming *stream)
> +static void uvc_video_halt(struct uvc_streaming *stream)
>  {
> -	uvc_video_stop_transfer(stream, 1);
> +	unsigned int epnum;
> +	unsigned int pipe;
> +	unsigned int dir;
>  
>  	if (stream->intf->num_altsetting > 1) {

Doesn't this imply the device is using isochronous mode?

>  		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
> -	} else {
> -		/*
> -		 * UVC doesn't specify how to inform a bulk-based device
> -		 * when the video stream is stopped. Windows sends a
> -		 * CLEAR_FEATURE(HALT) request to the video streaming
> -		 * bulk endpoint, mimic the same behaviour.
> -		 */
> -		unsigned int epnum = stream->header.bEndpointAddress
> -				   & USB_ENDPOINT_NUMBER_MASK;
> -		unsigned int dir = stream->header.bEndpointAddress
> -				 & USB_ENDPOINT_DIR_MASK;
> -		unsigned int pipe;
> -
> -		pipe = usb_sndbulkpipe(stream->dev->udev, epnum) | dir;
> -		usb_clear_halt(stream->dev->udev, pipe);
> +		return;
>  	}
>  
> +	/*
> +	 * UVC doesn't specify how to inform a bulk-based device

Then this comment doesn't look right. What about the code? This isn't
mentioned in the commit message either.

> +	 * when the video stream is stopped. Windows sends a
> +	 * CLEAR_FEATURE(HALT) request to the video streaming
> +	 * bulk endpoint, mimic the same behaviour.
> +	 */
> +	epnum = stream->header.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
> +	dir = stream->header.bEndpointAddress & USB_ENDPOINT_DIR_MASK;
> +	pipe = usb_sndbulkpipe(stream->dev->udev, epnum) | dir;
> +	usb_clear_halt(stream->dev->udev, pipe);
> +}
> +
> +void uvc_video_stop_streaming(struct uvc_streaming *stream)
> +{
> +	uvc_video_stop_transfer(stream, 1);
> +
> +	/*
> +	 * Barrier needed to synchronize with uvc_disconnect().
> +	 * We cannot call usb_* functions on a disconnected USB device.
> +	 */
> +	if (!smp_load_acquire(&stream->dev->disconnected))
> +		uvc_video_halt(stream);
> +
>  	uvc_video_clock_cleanup(stream);
>  }
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 6fb0a78b1b00..4318ce8e31db 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -559,6 +559,8 @@ struct uvc_device {
>  	unsigned int users;
>  	atomic_t nmappings;
>  
> +	bool disconnected;
> +
>  	/* Video control interface */
>  #ifdef CONFIG_MEDIA_CONTROLLER
>  	struct media_device mdev;
> 

-- 
Kind regards,

Sakari Ailus